[Jan-2022] NS0-183 Dumps Full Questions - NetApp NCSIE ONTAP Exam Study Guide
Exam Questions and Answers for NS0-183 Study Guide
NEW QUESTION 11
Which tool allows you to create a new FlexGroup volume?
- A. OnCommand Unified Manager
- B. Cluster Config Builder
- C. OnCommand System Manager
- D. NetAppDocs
Answer: C
NEW QUESTION 12
One of the nodes in your ONTAP 9.7 cluster has failed and is not coming back online.
Which two methods would you use to connect to the node failing to come back online? (Choose two.)
- A. Use the Intelligent Platform Management Interface.
- B. Use Secure Shell.
- C. Use the Service Processor Interface.
- D. Use Telnet.
Answer: B,C
NEW QUESTION 13
After properly cabling the NetApp CN1610 cluster switches, you see that joining the second node to a cluster fails because the node is not able to communicate with the other node.
In this scenario, what is causing this problem?
- A. The RCF file is not loaded properly.
- B. CN1610 is unsupported in newer ONTAP versions.
- C. The NTP server is not set.
- D. The cluster switches must be Cisco for more than two nodes in a cluster.
Answer: A
NEW QUESTION 14
An iSCSI LIF fails to migrate during a storage failover test.
In this scenario, why did the LIF not migrate?
- A. LIFs that serve block protocols do not failover.
- B. LIF failover was not enabled.
- C. A failover port was not defined.
- D. The failover policy was not configured.
Answer: A
NEW QUESTION 15
You are preparing for the installation of a new 2-node cluster with ONTAP 9.7 using NL-SAS drives. Your customer wants to use the cluster exclusively with FlexGroups.
In this scenario, which two statements are correct? (Choose two.)
- A. All NL-SAS drives are divided evenly across both nodes.
- B. All NL-SAS drives are assigned only to one of the nodes.
- C. A SAN protocol is licensed on both nodes.
- D. A NAS protocol is licensed on both nodes.
Answer: A,D
NEW QUESTION 16
You want to create a new intercluster LIF for cross-cluster replication and use the CLI. After you create the nac101_intercluster_lif_icl LIF, you are not able to see the LIF in the list of local intercluster LIFs.
Referring to the exhibit, what is the problem?
- A. The home node of the new intercluster LIF has reached the maximum of four intercluster LIFs.
- B. The intercluster LIF has assigned an IP address that is not in the intercluster VLAN.
- C. The assigned port for the intercluster e1c LIF is in the down admin state.
- D. The LIF that was created has the wrong role type.
Answer: D
NEW QUESTION 17
You are installing a new AFF A400 cluster that is running ONTAP 9.7 software. You are asked to attach an Amazon S3 cloud tier for FabricPool technology.
In this scenario, which two NetApp License File (NLF) types are supported for cloud tiering? (Choose two.)
- A. master
- B. term-based
- C. perpetual
- D. base
Answer: B,C
Explanation:
http://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-mgng-stor-tier-fp%2FGUID-C3C125BF-44DA-409D-9F93-B73545FB336B.html
NEW QUESTION 18
You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center.
In this scenario, which cluster configuration is allowed with ASA controllers?
- A. ASA controllers can only be added to clusters that have existing SAN licenses.
- B. Add the ASA controllers to an existing 4-node cluster with NAS licenses.
- C. Add the ASA controllers to an existing 10-node cluster.
- D. ASA controllers can only be installed as a standalone HA pair.
Answer: A
NEW QUESTION 19
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure a trap host on the cluster.
- B. Configure a firewall policy and allow SNMP.
- C. Configure DNS on the cluster.
- D. Configure an SNMP community string on the cluster.
Answer: A,C
NEW QUESTION 20
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. command history
- B. AutoSupport messages
- C. SNMP traps
- D. EMS messages
Answer: A,B
NEW QUESTION 21
You are installing a pair of Cisco Nexus 3132Q-V cluster switches and receive several syntax errors when the reference configuration file (RCF) is applied.
In this scenario, what are two reasons for these errors? (Choose two.)
- A. The switch was not in maintenance mode.
- B. An RCF file for a different version has been loaded.
- C. Cables were not removed before applying the RCF.
- D. The RCF was already applied.
Answer: B,D
NEW QUESTION 22
You have installed a new 2-node FAS9000 cluster with two external shelves. You want to make sure that each node has two paths to each disk in the shelves.
How do you verify your configuration?
- A. Use the storage disk option show command.
- B. Use the disk show -fields initiator command.
- C. Use the sysconfig command.
- D. Use the storage show disk -p command.
Answer: B
NEW QUESTION 23
Which NetApp tool relies on PowerShell to produce a comprehensive handover report to the customer?
- A. Fusion
- B. Active IQ
- C. NetAppDocs
- D. Config Advisor
Answer: C
NEW QUESTION 24
What is the default shelf ID for disk shelves with IOM12 modules?
- A. 01
- B. 0
- C. 00
- D. 1
Answer: C
NEW QUESTION 25
You are planning the deployment of a new 8-node ONTAP 9.5 cluster. To prepare for the installation, you want to create a custom configuration worksheet with all the information that the customer provided. You also want to use the worksheet to generate CLI commands for your installation.
In this scenario, which NetApp tool will help you achieve your goal?
- A. Fusion
- B. Config Validator
- C. ConfigBulider
- D. Config Advisor
Answer: C
NEW QUESTION 26
In an ONTAP switched cluster, which three types of traffic travels over the cluster network? (Choose three.)
- A. Epsilon voting
- B. intracluster SnapMirror
- C. cluster database replication
- D. remote cluster peering
- E. intercluster SnapMirror
Answer: C,D,E
NEW QUESTION 27
You want to ensure the highest path resilience and performance increase to the storage stack on your FAS8700 cluster.
In this scenario, which two types of stack cabling are available to use? (Choose two.)
- A. multipath HA
- B. mixed-mode
- C. single path
- D. quadpath HA
Answer: A,B
NEW QUESTION 28
You must cable a new AFF A700 with two DS224C shelves that are fully populated with 15.3 TB SSDs. You want to ensure that the maximum bandwidth between the disks and the controllers is reached.
In this scenario, according to NetApp best practices, which type of cabling should you use?
- A. single-path HA
- B. quad-path HA
- C. multipath HA
- D. direct connected HA
Answer: B
NEW QUESTION 29
Which two SVMs are automatically created during the cluster setup? (Choose two.)
- A. system SVM
- B. node SVM
- C. admin SVM
- D. data SVM
Answer: A,C
Explanation:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sag%2FGUID-D860985F-11BF-4589-9457-E0FD03130B1F.html
NEW QUESTION 30
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?
- A. NetAppDocs output report
- B. ONTAP System Manager
- C. Active IQ Config Advisor worksheet
- D. Active IQ scheduled reports
Answer: D
NEW QUESTION 31
In ONTAP 9.7 software, how many different replicated databases (RDBs) exist per node?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Explanation/Reference: https://www.storagefreak.net/2017/08/netapp-cdot-ontap-9-rdb-and-cluster-replication-ring
NEW QUESTION 32
......
NetApp Storage Installation Engineer, ONTAP Free Update With 100% Exam Passing Guarantee: https://www.premiumvcedump.com/NetworkAppliance/valid-NS0-183-premium-vce-exam-dumps.html