Get ready to pass the 156-915.80 Exam right now using our CCSE Update Exam Package
A fully updated 2021 156-915.80 Exam Dumps exam guide from training expert PremiumVCEDump
How to study the 156-915.80 Exam
PremiumVCEDump expert team recommends you to prepare some notes on these topics along with it don’t forget to practice Check Point Certified Security Expert Update - R80 (CCSE) 156-915.80 Exam which been written by our expert team, Both these will help you a lot to clear this exam with good marks.
The benefit in Obtaining the 156-915.80 Exam Certification
- Capture the attention of recruiters
- Gain employer recognition for promotions and raises
- This 156-215.80 exam covers a different technology to meet the needs of varying job roles
- Score CP job opportunities
NEW QUESTION 283
On R80.10 when configuring Third-Party devices to read the logs using the LEA (Log Export API) the default Log Server uses port:
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 284
When Dynamic Dispatcher is enabled, connections are assigned dynamically with the exception of
- A. HTTPS
- B. VolP
- C. QOS
- D. Threat Emulation
Answer: B
Explanation:
Section: (none)
Explanation/Reference:
Explanation:
The following types of traffic are not load-balanced by the CoreXL Dynamic Dispatcher (this traffic will always be handled by the same CoreXL FW instance):
VoIP
VPN encrypted packets
Reference: https://supportcenter.checkpoint.com/supportcenter/portal?
eventSubmit_doGoviewsolutiondetails=&solutionid=sk105261
NEW QUESTION 285
What is the command to check the status of Check Point processes?
- A. top
- B. cpwd_admin list
- C. cphaprob list
- D. cptop
Answer: B
NEW QUESTION 286
You noticed that CPU cores on the Security Gateway are usually 100% utilized and many packets were dropped. You don't have a budget to perform a hardware upgrade at this time. To optimize drops you decide to use Priority Queues and fully enable Dynamic Dispatcher. How can you enable them?
- A. fw cti multik dynamic_dispatching on
- B. fw cti multik set_mode 9
- C. fw cti multik dynamic_dispatching set_mode 9
- D. fw cti multik pq enable
Answer: B
Explanation:
Explanation/Reference:
Explanation:
To fully enable the CoreXL Dynamic Dispatcher on Security Gateway:
1. Run in Expert mode:
[Expert@HostName]# fw ctl multik set_mode 9
Example output:
[[email protected]:0]# fw ctl multik set_mode 9
Please reboot the system
[[email protected]:0]#
Reference: https://supportcenter.checkpoint.com/supportcenter/portal?
eventSubmit_doGoviewsolutiondetails=&solutionid=sk105261
NEW QUESTION 287
As a valid Mobile Access Method, what feature provides Capsule Connect/VPN?
- A. Full Layer4 VPN -SSL VPN that gives users network access to all mobile applications
- B. that is used to deploy the mobile device as a generator of one-time passwords for authenticating to an RSA Authentication Manager
- C. Full layer3 VPN -IPSec VPN that gives users network access to all mobile applications
- D. You can make sure that documents are sent to the intended recipients only
Answer: C
Explanation:
Explanation/Reference:
Reference: https://sc1.checkpoint.com/documents/R77/CP_R77_Mobile_Access_WebAdmin/82201.htm
NEW QUESTION 288
In SPLAT the command to set the timeout was idle. In order to achieve this and increase the timeout for Gaia, what command do you use?
- A. set idle <value>
- B. set inactivity-timeout <value>
- C. set timeout <value>
- D. set inactivity <value>
Answer: B
Explanation:
Reference: https://supportcenter.checkpoint.com/supportcenter/portal?
eventSubmit_doGoviewsolutiondetails=&solutionid=sk95447
NEW QUESTION 289
What is the primary benefit of using the command upgrade_export over either backup or snapshot?
- A. The commands backup and snapshot can take a long time to run whereas upgrade_export will take a much shorter amount of time.
- B. upgrade_export will back up routing tables, hosts files, and manual ARP configurations, where backup and snapshot will not.
- C. upgrade_export has an option to back up the system and SmartView Tracker logs while backup and snapshot will not.
- D. upgrade_export is operating system independent and can be used when backup or snapshot is not available.
Answer: D
NEW QUESTION 290
Which of the following authentication methods can be configured in the Identity Awareness setup wizard?
- A. Captive Portal
- B. Check Point Password
- C. TACACS
- D. Windows password
Answer: A
NEW QUESTION 291
In order to optimize performance of a Security Gateway you plan to use SecureXL technology. Your company uses different types of applications. Identify application traffic that will NOT be accelerated
- A. TCP connections to the corporate Web-server
- B. Transactions to the external application server using UDP
- C. Custom application multicast traffic
- D. Corporate relational database TCP traffic
Answer: C
NEW QUESTION 292
Which command would you use to determine the current Cluster Global ID?
- A. Cish -> cphaconf cluster_id get
- B. fw ctl show global_cluster_id
- C. Expert -> cphaconf cluster_id get
- D. fw ctl get int global_cluster_id
Answer: C
Explanation:
Explanation/Reference: https://supportcenter.checkpoint.com/supportcenter/portal?
eventSubmit_doGoviewsolutiondetails=&solutionid=sk25977
NEW QUESTION 293
Due to high CPU workload on the Security Gateway, the security administrator decided to purchase a new multicore CPU to replace the existing single core CPU. After installation, is the administrator required to perform any additional tasks?
- A. Go to clish-Run cpconfig | Configure CoreXL to make use of the additional Cores | Exit cpconfig |Reboot Security Gateway
- B. Go to clish-Run cpconfig | Configure CoreXL to make use of the additional Cores | Exit cpconfig |Reboot Security Gateway | Install Security Policy.
- C. Administrator does not need to perform any task. Check Point will make use of the newly installed CPU and Cores.
- D. Go to clish-Run cpstop | Run cpstart
Answer: A
NEW QUESTION 294
When deploying multiple clustered firewalls on the same subnet, what does the firewall administrator need to configure to prevent CCP broadcasts being sent to the wrong cluster?
- A. Set the fwha_mac_magic parameter in the $FWDIR/boot/fwkern.conf file
- B. Set the cluster global ID using the command "cphaconf cluster_id set <value>"
- C. Set the fwha_mac_magic_forward parameter in the $CPDIR/boot/modules/ha_boot.
conf - D. Set the cluster global ID using the command "fw ctt set cluster_id <value>"
Answer: B
Explanation:
Reference: https://supportcenter.checkpoint.com/supportcenter/portal?
eventSubmit_doGoviewsolutiondetails=&solutionid=sk25977
NEW QUESTION 295
John Adams is an HR partner in the ACME organization. ACME IT wants to limit access to HR servers to designated IP addresses to minimize malware infection and unauthorized access risks. Thus, the gateway policy permits access only from John's desktop which is assigned a static IP address 10.0.0.19.
John received a laptop and wants to access the HR Web Server from anywhere in the organization. The IT department gave the laptop a static IP address, but that limits him to operating it only from his desk. The current Rule Base contains a rule that lets John Adams access the HR Web Server from his laptop with a static IP (10.0.0.19). He wants to move around the organization and continue to have access to the HR Web Server.
To make this scenario work, the IT administrator:
1) Enables Identity Awareness on a gateway, selects AD Query as one of the Identity Sources installs the policy.
2) Adds an access role object to the Firewall Rule Base that lets John Adams PC access the HR Web Server from any machine and from any location.
What should John do when he cannot access the web server from a different personal computer?
- A. John should lock and unlock his computer
- B. The access should be changed to authenticate the user instead of the PC
- C. John should install the Identity Awareness Agent
- D. Investigate this as a network connectivity issue
Answer: B
NEW QUESTION 296
You want to implement Static Destination NAT in order to provide external, Internet users access to an internal Web Server that has a reserved (RFC 1918) IP address. You have an unused valid IP address on the network between your Security Gateway and ISP router. You control the router that sits between the firewall external interface and the Internet.
What is an alternative configuration if proxy ARP cannot be used on your Security Gateway?
- A. Publish a proxy ARP entry on the ISP router instead of the firewall for the valid IP address.
- B. Place a static host route on the firewall for the valid IP address to the internal Web server.
- C. Place a static ARP entry on the ISP router for the valid IP address to the firewall's external address.
- D. Publish a proxy ARP entry on the internal Web server instead of the firewall for the valid IP address.
Answer: C
NEW QUESTION 297
When a packet is flowing through the security gateway, which one of the following is a valid inspection path?
- A. Acceleration Path
- B. Small Path
- C. Firewall Path
- D. Medium Path
Answer: D
NEW QUESTION 298
For Management High Availability, which of the following is NOT a valid synchronization status?
- A. Lagging
- B. Never been synchronized
- C. Collision
- D. Down
Answer: D
Explanation:
Explanation/Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_SecMan_WebAdmin/html_frameset.htm?
topic=documents/R76/CP_R76_SecMan_WebAdmin/13132
NEW QUESTION 299
What GUI client would you use to view an IPS packet capture?
- A. Smart Reporter
- B. Smart Update
- C. SmartView Monitor
- D. SmartView Tracker
Answer: D
Explanation:
Explanation/Reference:
Reference: https://sc1.checkpoint.com/documents/R76/CP_R76_IPS_AdminGuide/12766.htm
NEW QUESTION 300
What CLI command compiles and installs a Security Policy on the target's Security Gateways?
- A. fwm load
- B. fwm fetch
- C. fwm install
- D. fwm compile
Answer: A
Explanation:
Explanation/Reference: http://dl3.checkpoint.com/paid/7e/CheckPoint_R65_CLI_AdminGuide.pdf?
HashKey=1540653105_b07751355cf424cd738b8409d23ad59c&xtn=.pdf
NEW QUESTION 301
Firewall policies must be configured to accept VRRP packets on the GAiA platform if it runs Firewall software. The Multicast destination assigned by the Internet Assigned Numbers Authority (IANA) for VRRP is:
- A. 224.0.0.5
- B. 224.0.0.102
- C. 224.0.0.18
- D. 224.0.0.22
Answer: C
Explanation:
Section: (none)
Explanation/Reference:
Reference: https://www.iana.org/assignments/multicast-addresses/multicast-addresses.xhtml
NEW QUESTION 302
What is mandatory for ClusterXL to work properly?
- A. The number of cores must be the same on every participating cluster node
- B. The Magic MAC number must be unique per cluster node.
- C. The Sync Interface must not have an IP address configured
- D. If you have "Non-monitored Private" interfaces, the number of those interfaces must be the same on all cluster members
Answer: B
Explanation:
Explanation
NEW QUESTION 303
......
Check Point Certified Security Expert Update - R80 (CCSE) 156-915.80 Exam
Check Point Certified Security Expert Update - R80 (CCSE) 156-915.80 Exam is related to Check Point Certified Security Expert Certification.156-915.80 Exam Validate candidates understanding and skills necessary to configure and optimally manage Check Point Next-Generation Firewalls. System Security Consultant and Server Managers usually hold or pursue this certification and candidate can expect the same job roles after completion of this Check Point Certified Security Expert Update - R80 (CCSE) 156-915.80 certification.
Master 2021 Latest The Questions CCSE Update and Pass 156-915.80 Real Exam!: https://www.premiumvcedump.com/CheckPoint/valid-156-915.80-premium-vce-exam-dumps.html