156-915.80 Braindumps Real Exam Updated on Oct 25, 2021 with 500 Questions
Latest 156-915.80 PDF Dumps & Real Tests Free Updated Today
For more info visit:
Check Point Certified Security Expert Update - R80 (CCSE) 156-915.80 Exam
Check Point Certified Security Expert Update - R80 (CCSE) 156-915.80 Exam is related to Check Point Certified Security Expert Certification.156-915.80 Exam Validate candidates understanding and skills necessary to configure and optimally manage Check Point Next-Generation Firewalls. System Security Consultant and Server Managers usually hold or pursue this certification and candidate can expect the same job roles after completion of this Check Point Certified Security Expert Update - R80 (CCSE) 156-915.80 certification.
NEW QUESTION 143
John is configuring a new R80 Gateway cluster but he can not configure the cluster as Third Party IP Clustering because this option is not available in Gateway Cluster Properties.
What's happening?
- A. Third Party Clustering is not available for R80 Security Gateways.
- B. ClusterXL needs to be unselected to permit third party clustering configuration.
- C. John is not using third party hardware as IP Clustering is part of Check Point's IP Appliance.
- D. John has an invalid ClusterXL license.
Answer: B
NEW QUESTION 144
What API command below creates a new host with the name "New Host" and IP address of
"192.168.0.10"?
- A. add host name "New Host" ip-address "192.168.0.10"
- B. new host name "New Host" ip-address "192.168.0.10"
- C. set host name "New Host" ip-address "192.168.0.10"
- D. create host name "New Host" ip-address "192.168.0.10"
Answer: A
Explanation:
Explanation/Reference:
Explanation:
Sample Command with SmartConsole CLI You can use the add host command to create a new host and then publish the changes. > add host name "Sample_Host" ip-address "192.0.2.3" > publish Reference: http://dl3.checkpoint.com/paid/29/29532b9eec50d0a947719ae631f640d0/ CP_R80_CheckPoint_API_ReferenceGuide.pdf?
HashKey=1522171823_f53d2a32a77bde441b88d53824dcb893&xtn=.pdf
NEW QUESTION 145
If the Active Security Management Server fails or if it becomes necessary to change the Active to Standby, the following steps must be taken to prevent data loss. Providing the Active Security Management Server is responsive, which of these steps should NOT be performed:
- A. Rename the hostname of the Standby member to match exactly the hostname of the Active member.
- B. Manually synchronize the Active and Standby Security Management Servers.
- C. Change the Active Security Management Server to Standby.
- D. Change the Standby Security Management Server to Active.
Answer: A
NEW QUESTION 146
What are types of Check Point APIs available currently as part of R80.10 code?
- A. CPMI API, Management API, Threat Prevention API and Identity Awareness Web Services API
- B. Management API, Threat Prevention API, Identity Awareness Web Services API and OPSEC SDK API
- C. OSE API, OPSEC SDK API, Threat Extraction API and Policy Editor API
- D. Security Gateway API, Management API, Threat Prevention API and Identity Awareness Web Services API
Answer: B
Explanation:
Explanation/Reference:
Reference: http://dl3.checkpoint.com/paid/29/29532b9eec50d0a947719ae631f640d0/ CP_R80_CheckPoint_API_ReferenceGuide.pdf?
HashKey=1522171994_d7bae71a861bbc54c18c61420e586d77&xtn=.pdf
NEW QUESTION 147
Jack has finished building his new SMS server, Red, on new hardware. He used SCP to move over the Red-old.tgzexport of his old SMS server. What is the command he will use to import this into the new server?
- A. Red> ./migrate import Red-old.tgz
- B. Red> ./upgrade import Red-old.tgz
- C. Expert@Red# ./upgrade import Red-old.tgz
- D. Expert@Red# ./migrate import Red-old.tgz
Answer: D
NEW QUESTION 148
Which of the following commands shows the status of processes?
- A. cpwd -l
- B. cpwd_admin -l
- C. cpwd_admin list
- D. cpwd admin_list
Answer: C
Explanation:
Reference: https://community.checkpoint.com/thread/8054-cpwdadmin-list-overview-sms
NEW QUESTION 149
CORRECT TEXT
Type the command and syntax to view critical devices on a cluster member in a ClusterXL environment.
Answer:
Explanation:
cphaprob -ia
list
NEW QUESTION 150
Which directory below contains log files?
- A. /opt/CPshrd-R80/log
- B. /opt/CPsuite-R80/log
- C. /opt/CPsuite-R80/fw1/log
- D. /opt/CPSmartlog-R80/log
Answer: C
Explanation:
Section: (none)
NEW QUESTION 151
Joey and Vanessa are firewall administrators in their company. Joey wants to run Management API server on his Security Management server. He is logging in to a Smart Console and goes to the Manage & Settings > Blade. In Management API section, he proceeds to Advanced Settings. He likes to set up the Management API server to automatic run at startup. He is surprised, because this functionality is already selected by default.
What is the reason, that functionality is already enabled?
- A. Vanessa already enabled this feature on the Security server before him, but didn't tell Joey.
- B. Joey is an administrator of Distributed Security Management with at least 4GB of RAM.
- C. Joey is an administrator of StandAlone Security Management with Gateway with 6GB of RAM.
- D. Vanessa is an administrator of Standalone Security Management with at least 6GB of RAM.
Answer: B
Explanation:
Explanation/Reference:
Reference: https://sc1.checkpoint.com/documents/R80/CP_R80_SecMGMT/html_frameset.htm?
topic=documents/R80/CP_R80_SecMGMT/117948
NEW QUESTION 152
Your perimeter Security Gateway's external IP is 200.200.200.3. Your network diagram shows:
Required: Allow only network 192.168.10.0 and 192.168.20.0 to go out to the Internet, using 200.200.200.5.
The local network 192.168.1.0/24 needs to use 200.200.200.3 to go out to the Internet.
Assuming you enable all the settings in the NAT page of Global Properties, how could you achieve these requirements?
- A. Create a network object 192.168.0.0/16. Enable Hide NAT on the NAT page. Enter 200.200.200.5 as the hiding IP address. Add an ARP entry for 200.200.200.5 for the MAC address of 200.200.200.3.
- B. Create two network objects: 192.168.10.0/24 and 192.168.20.0/24. Add the two network objects to a group object. Create a manual NAT rule like the following: Original source - group object; Destination - any; Service - any; Translated source - 200.200.200.5; Destination - original; Service - original.
- C. Create network objects for 192.168.10.0/24 and 192.168.20.0/24. Enable Hide NAT on both network objects, using 200.200.200.5 as hiding IP address. Add an ARP entry for 200.200.200.3 for the MAC address of 200.200.200.5.
- D. Create an Address Range object, starting from 192.168.10.1 to 192.168.20.254. Enable Hide NAT on the NAT page of the address range object. Enter Hiding IP address 200.200.200.5. Add an ARP entry for 200.200.200.5 for the MAC address of 200.200.200.3.
Answer: D
NEW QUESTION 153
Fill in the blank.
In New Mode HA, the internal cluster IP VIP address is 10.4.8.3. An internal host 10.4.8.108 successfully pings its Cluster and receives replies. Review the ARP table from the internal Windows host 10.4.8.108. Based on this information, what is the active cluster member's IP address?
Answer:
Explanation:
10.4.8.2
NEW QUESTION 154
What are you required to do before running the command upgrade_export?
- A. Close all GUI clients.
- B. Run a cpstop on the Security Gateway.
- C. Run cpconfig and set yourself up as a GUI client.
- D. Run a cpstop on the Security Management Server.
Answer: A
NEW QUESTION 155
Fred is troubleshooting a NAT issue and wants to check to see if the inbound connection from his internal network is being translated across the interface in the firewall correctly. He decides to use the fw monitor to capture the traffic from the source 192.168.3.5 or the destination of 10.1.1.25 on his Security Gateway, Green that has an IP of 192.168.4.5. What command captures this traffic in a file that he can download and review with WireShark?
Expert@Green# fwmonitor -e "accept src=192.168.3.5 and dst=10.1.1.25;" -o
- A. monitor.out
Expert@Green# fwmonitor -e "accept src=192.168.3.5 or dst=10.1.1.25;" -o - B. monitor.out
- C. monitor.out
Expert@Green# fw monitor -e "accept src=192.168.3.5 or dst=10.1.1.25;" -o - D. monitor.out
Expert@Green# fw monitor -e "accept src=192.168.4.5 or dst=10.1.1.25;" -o
Answer: B
NEW QUESTION 156
What command verifies that the API server is responding?
- A. api_get_status
- B. api stat
- C. api status
- D. show api_status
Answer: C
NEW QUESTION 157
Check Point APIs allow system engineers and developers to make changes to their organization's security policy with CLI tools and Web Services for all of the following except?
- A. Create products that use and enhance 3rd party solutions.
- B. Create new dashboards to manage 3rd party task
- C. Execute automated scripts to perform common tasks.
- D. Create products that use and enhance the Check Point Solution.
Answer: B
Explanation:
Check Point APIs let system administrators and developers make changes to the security policy with CLI tools and web-services. You can use an API to:
Use an automated script to perform common tasks
Integrate Check Point products with 3rd party solutions
Create products that use and enhance the Check Point solution
Reference: http://dl3.checkpoint.com/paid/29/29532b9eec50d0a947719ae631f640d0/ CP_R80_CheckPoint_API_ReferenceGuide.pdf?
HashKey=1522190468_125d63ea5296b7dadd3e4fd81c708cc5&xtn=.pdf
NEW QUESTION 158
For best practices, what is the recommended time for automatic unlocking of locked admin accounts?
- A. 15 minutes
- B. 20 minutes
- C. 30 minutes at least
- D. Admin account cannot be unlocked automatically
Answer: C
Explanation:
Section: (none)
NEW QUESTION 159
Fill in the blank. The user wants to replace a failed Windows-based firewall with a new server running GAiA.
Answer:
Explanation:
For the most complete restore of an GAiA configuration, he or she will use the command migrate_import
NEW QUESTION 160
To ensure that VMAC mode is enabled, which CLI command you should run on all cluster members?
- A. cphaprob -a if
- B. fw ctl set int fwha vmac global param enabled
- C. fw ctl get int fwha vmac global param enabled; result of command should return value 1
- D. fw ctl get int fwha_vmac_global_param_enabled; result of command should return value 1
Answer: D
NEW QUESTION 161
Why would you not see a CoreXL configuration option in cpconfig?
- A. CoreXL is disabled via policy
- B. CoreXL is not enabled in the gateway object
- C. CoreXL is not licenses
- D. The gateway only has one processor
Answer: D
Explanation:
Section: (none)
NEW QUESTION 162
......
156-915.80 Exam topics
Candidates must know the exam topics before they start of preparation. Because it will really help them in hitting the core. Our 156-915.80 dumps will include the following topics:
- Understand Redundancy
- Understand System Management
- Understand Acceleration
- Understand SmartEvent
- Understand Threat Prevention
- Understand Automation and Orchestration
- Understand Mobile and Remote Access
156-915.80 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund: https://www.premiumvcedump.com/CheckPoint/valid-156-915.80-premium-vce-exam-dumps.html