Get Perfect Results with Premium NSE7_SDW-7.0 Dumps Updated 70 Questions
Free NSE7_SDW-7.0 Exam Study Guide for the NEW Dumps Test Engine
Fortinet NSE7_SDW-7.0 exam is intended for professionals who work in the field of network security and who are responsible for the design, implementation, or management of an organization's SD-WAN infrastructure. This rigorous exam is designed to ensure that candidates have the knowledge and practical skills necessary to keep networks safe and secure in an increasingly complex and dynamic environment. It provides a standard for the industry and helps ensure that organizations have access to qualified security personnel who can help them build and maintain secure and reliable SD-WAN networks.
Fortinet, a leading provider of cybersecurity solutions, offers a wide range of certification exams for IT professionals. Among them is the Fortinet NSE7_SDW-7.0 certification exam, also known as the Fortinet NSE 7 - SD-WAN 7.0. Fortinet NSE 7 - SD-WAN 7.0 certification exam is designed to validate the knowledge and skills of IT professionals in deploying, configuring, and troubleshooting Fortinet's SD-WAN solutions.
NEW QUESTION # 25
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit A shows the source NAT (SNAT) global setting and exhibit B shows the routing table on FortiGate.
Based on the exhibits, which two actions does FortiGate perform on existing sessions established over port2, if the administrator increases the static route priority on port2 to 20? (Choose two.)
- A. FortiGate flags the sessions as dirty.
- B. FortiGate continues routing the sessions with no SNAT, over port2.
- C. FortiGate performs a route lookup for the original traffic only.
- D. FortiGate updates the gateway information of the sessions with SNAT so that they use port1 instead of port2.
Answer: A,D
NEW QUESTION # 26
What are two benefits of using the Internet service database (ISDB) in an SD-WAN rule? (Choose two.)
- A. The ISDB is dynamically updated and reduces administrative overhead.
- B. The ISDB requires application control to maintain signatures and perform load balancing.
- C. The ISDB applies rules to traffic from specific sources, based on application type.
- D. The ISDB contains the IP addresses and port ranges of well-known internet services.
Answer: A,D
NEW QUESTION # 27
Which components make up the secure SD-WAN solution?
- A. Telephone, ISDN, and telecom network.
- B. Datacenter, branch offices, and public cloud
- C. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
- D. Application, antivirus, and URL, and SSL inspection
Answer: C
NEW QUESTION # 28
Which best describes the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?
- A. Interface-based shaping mode
- B. Reverse-policy shaping mode
- C. Per-IP shaping mode
- D. Shared-policy shaping mode
Answer: A
Explanation:
Interface-based shaping goes further, enabling traffic controls based on percentage of the interface bandwidth.
NEW QUESTION # 29
Which two statements about SD-WAN central management are true? (Choose two.)
- A. The objects are saved in the ADOM common object database.
- B. It does not support meta fields.
- C. It supports normalized interfaces for SD-WAN member configuration.
- D. It uses templates to configure SD-WAN on managed devices.
Answer: A,D
Explanation:
Explanation
Normalized interfaces are not supported for SD-WAN templates. You can create multiple SD-WAN zones and add interface members to the SD-WAN zones. You must bind the interface members by name to physical interfaces or VPN interfaces.https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-new-features/794804/new-sd-wan-template-
NEW QUESTION # 30 
Which two conclusions for traffic that matches the traffic shaper are true? (Choose two.)
- A. The measured bandwidth is less than 100 KBps.
- B. The traffic shaper limits the bandwidth of each source IP to a maximum of 6250 KBps.
- C. The traffic shaper drops packets if the bandwidth exceeds 6250 KBps.
- D. The traffic shaper drops packets if the bandwidth is less than 2500 KBps.
Answer: A,C
NEW QUESTION # 31
Which two performance SLA protocols enable you to verify that the server response contains a specific value? (Choose two.)
- A. dns
- B. twamp
- C. icmp
- D. http
Answer: A,D
Explanation:
Pages 85,86 in Study guide 7.0 Pages 100,101 in Study guide 7
NEW QUESTION # 32
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set source 100.64.1.1.
- B. Set load-balance-mode source-ip-ip-based.
- C. Set priority 10.
- D. Set cost 15.
Answer: C,D
NEW QUESTION # 33
Refer to the exhibit.
The exhibit shows the SD-WAN rule status and configuration.
Based on the exhibit, which change in the measured packet loss will make T_INET_1_0 the new preferred member?
- A. When T_INET_1_0 has 4% packet loss.
- B. When T_INET_0_0 has 12% packet loss.
- C. When T_INET_0_0 has 4% packet loss.
- D. When all three members have the same packet loss.
Answer: D
NEW QUESTION # 34
Which diagnostic command can you use to show the member utilization statistics measured by performance SLAs for the last 10 minutes?
- A. diagnose sys sdwan sla-log
- B. diagnose sys sdwan log
- C. diagnose sys sdwan intf-sla-log
- D. diagnose sys sdwan health-check
Answer: A
Explanation:
SD-WAN 7.2 Study Guide page 321 You can view the stored member metrics by running the diagnose sys sdwan sla-log command. Note that you must include the name of the performance SLA followed by the member configuration index number. To display the SLA logs per interface, you run the diagnose sys sdwan intf-sla-log command.
NEW QUESTION # 35
Refer to the exhibits.
Exhibit B -
Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate.
Based on the FortiGate configuration shown in the exhibits, what issue might you encounter when creating an SD-WAN zone for port1 and port2?
- A. port1 and port2 are not administratively down.
- B. port1 is assigned a manual IP address.
- C. port2 is referenced in a static route.
- D. port1 is referenced in a firewall policy.
Answer: D
NEW QUESTION # 36
What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)
- A. A factory reset performed on FortiGate.
- B. The FortiGate cloud key has not been added to the FortiGate cloud portal.
- C. The zero-touch provisioning process has completed internally, behind FortiGate.
- D. FortiGate has obtained a configuration from the platform template in FortiGate cloud.
- E. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager
Answer: B,C
NEW QUESTION # 37
Refer to the exhibit, which shows the IPsec phase 1 configuration of a spoke.
What must you configure on the IPsec phase 1 configuration for ADVPN to work with SD-WAN?
- A. You must set ike-version to 1.
- B. You must enable auto-discovery-sender.
- C. You must enable net-device.
- D. You must disable idle-timeout.
Answer: C
NEW QUESTION # 38
Which CLI command do you use to perform real-time troubleshooting for ADVPN negotiation?
- A. get ipsec tunnel list
- B. diagnose debug application ike
- C. diagnose vpn tunnel list
- D. get router info routing-table all
Answer: B
Explanation:
IKE real-time debug - useful when debugging ADVPN shortcut messages and spoke-to-spoke negotiations.
* diagnose debug console timestamp enable
* diagnose vpn ike log filter clear
* diagnose vpn ike log filter mdst-addr4 <ip.of.hub> <ip.of.spoke>
* diagnose debug application ike -1
* diagnose debug enable
NEW QUESTION # 39
Which two statements about SD-WAN central management are true? (Choose two.)
- A. The objects are saved in the ADOM common object database.
- B. It does not support meta fields.
- C. It supports normalized interfaces for SD-WAN member configuration.
- D. It uses templates to configure SD-WAN on managed devices.
Answer: A,D
Explanation:
Normalized interfaces are not supported for SD-WAN templates. You can create multiple SD-WAN zones and add interface members to the SD-WAN zones. You must bind the interface members by name to physical interfaces or VPN interfaces.https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-new-features/794804/new-sd-wan-template-fmg
NEW QUESTION # 40
Refer to the exhibits.
Exhibit A
Exhibit B -
Exhibit A shows the configuration for an SD-WAN rule and exhibit B shows the respective rule status, the routing table, and the member status.
The administrator wants to understand the expected behavior for traffic matching the SD-WAN rule.
Based on the exhibits, what can the administrator expect for traffic matching the SD-WAN rule?
- A. The traffic will be load balanced across all three overlays.
- B. The traffic will be routed over T_INET_0_0.
- C. The traffic will be routed over T_INET_1_0.
- D. The traffic will be routed over T_MPLS_0.
Answer: C
NEW QUESTION # 41 
Two hub-and-spoke groups are connected through a site-to-site IPsec VPN between Hub 1 and Hub 2. The administrator configured ADVPN on both hub-and-spoke groups.
Which two outcomes are expected if a user in Toronto sends traffic to London? (Choose two.)
- A. London generates an IKE information message that contains the Toronto public IP address.
- B. The first packets from Toronto to London are routed through Hub 1 then to Hub 2.
- C. Traffic from Toronto to London triggers the dynamic negotiation of a direct site-to-site VPN.
- D. Toronto needs to establish a site-to-site tunnel with Hub 2 to bypass Hub 1.
Answer: B,C
NEW QUESTION # 42
Refer to the exhibit.
Which are two expected behaviors of the traffic that matches the traffic shaper? (Choose two.)
- A. The traffic shaper limits the combined bandwidth of all connections to a maximum of 5 MB/sec.
- B. The number of simultaneous connections among all source IP addresses cannot exceed five connections.
- C. The traffic shaper limits the bandwidth of each source IP address to a maximum of 625 KB/sec.
- D. The number of simultaneous connections allowed for each source IP address cannot exceed five connections.
Answer: C,D
NEW QUESTION # 43
......
NSE7_SDW-7.0 PDF Dumps Extremely Quick Way Of Preparation: https://www.premiumvcedump.com/Fortinet/valid-NSE7_SDW-7.0-premium-vce-exam-dumps.html
Download NSE7_SDW-7.0 Dumps (2024) - Free PDF Exam Demo: https://drive.google.com/open?id=16dz6KcBrNugn6O2VFvvfB9I8FIJc8-2-