[Feb 08, 2023] ANVE Free Exam Questions with Quality Guaranteed [Q29-Q49]

Share

[Feb 08, 2023] ANVE Free Exam Questions with Quality Guaranteed

 ANVE Free Exam Files Downloaded Instantly


What is Axis ANVE Certification Exam

Axis ANVE certification exam is for individuals who are interested in pursuing a career in TV distribution, network video networking, and end-to-end performance. Those who are interested in the ANVE certification program must successfully take an examination from Axis. The exam is currently only available in English but will be translated into more languages over time. This exam is for anyone and everyone, even those who have no experience with Axis products or any type of knowledge of the technologies that are on the test. This certification exam is one of several offered to help demonstrate expertise in the realm of video and network technology, and is certified in this area is not only a great way to show off your knowledge, but can actually provide you with some benefits which are also covered in our Axis ANVE Dumps. For example, if you're looking for a job in the field of network video or TV distribution, it's a pretty big indicator that you know what you're talking about. And on top of that, many employers even see certifications as a way to justify giving their employees more money. If you've spent years in this field and are looking to prove your knowledge, then this is a great step towards certification. While you may already know everything that's on the test, it's always good to have objective proof of your knowledge. This can get you promoted at work or help you land a new job with another company.

 

NEW QUESTION 29
An installation with an AXIS P1344 experiences image flickering. How can this be remedied?

  • A. Adding white light to the scene
  • B. Changing the camera's exposure setting
  • C. Adding IR light to the scene
  • D. Changing the camera's white balance

Answer: B

 

NEW QUESTION 30
Ghost image is when

  • A. The frame rate is too low.
  • B. The shutter time is too long.
  • C. The lens is using too high f-stop value.
  • D. The gain is too high.

Answer: B

 

NEW QUESTION 31
When would the most noticeable difference between progressive scan and interlaced video be apparent?

  • A. During live viewing of a football game
  • B. Viewing frame-by-frame recorded video of an empty field
  • C. Viewing frame-by-frame recorded video of moving vehicles
  • D. During live viewing of an office lobby, after work hours

Answer: C

 

NEW QUESTION 32
Outdoor ready cameras in the AXIS Q60 Series typically works with 60 W PoE, if we connect it to 30W
PoE it will

  • A. Give picture but impossible to pan and tilt.
  • B. Work but with limited pan and tilt speed.
  • C. Work for a limited time.
  • D. Work but with limited temperature specification.

Answer: D

 

NEW QUESTION 33
What is the maximum distance for a 10OBaseTX Ethernet carrying 802.3at PoE connection between a switch and a camera without any extenders or repeaters?

  • A. 500 m (1640 ft)
  • B. 100 m (328 ft)
  • C. 150 m (492 ft)
  • D. 50 m (164 ft)

Answer: B

 

NEW QUESTION 34
Which security features are provided through a managed switch?

  • A. HTTPS encryption and IP subnets
  • B. IEEE 802.1 X port-based authentication and VLANs
  • C. IP subnets and VLANs
  • D. IEEE 802.1 X port-based authentication and HTTPS encryption

Answer: B

 

NEW QUESTION 35
In a dark indoor environment one single Axis illuminator is available. At a distance of 1 m (3 ft 3 in) away from the illuminator the light intensity is 1024 lux. At what distance from the light source will the light intensity be 256 lux?

  • A. 16 m (52 ft 6 in)
  • B. 8 m (26 ft 3 in)
  • C. 2 m (6 ft 7 in)
  • D. 4m{13 ft 1 in)

Answer: C

 

NEW QUESTION 36
If a camera lens is broken and you need to replace it, you should always disconnect the power and network cables because there is a risk that

  • A. The camera electronics will short circuit.
  • B. The lens electronics will short circuit.
  • C. The shutter will break.
  • D. The sensor will attract dust.

Answer: D

 

NEW QUESTION 37
IP51 and IP52 means that the camera

  • A. Is resistant to dust and dripping water.
  • B. Is designed for tough environments.
  • C. Can be placed in or outdoors.
  • D. Is vandal resistant.

Answer: A

 

NEW QUESTION 38
Which statements on Group of video (GOV) length are true? (Choose two)

  • A. A long GOV length increases the storage time on SD card
  • B. The GOV length can be adjusted in both Motion JPEG and H.264
  • C. The GOV length setting has an impact on bandwidth
  • D. The GOV length setting is only used for recording
  • E. The GOV length setting only has an impact on MPEG-4

Answer: A,C

 

NEW QUESTION 39
Why is it recommended to make a list of the Axis network video product serial numbers in an installation?

  • A. It make it is easier to identify the camera in AXIS Camera Management
  • B. It provides an overview of what equipment has been used
  • C. It gives the status of the camera or encoder
  • D. The product name can be found inside the serial number

Answer: A

 

NEW QUESTION 40
For which purposes would a thermal network camera be a viable alternative to a standard network camera? (Choose three)

  • A. Detection at daylight
  • B. Identification of a person
  • C. Detection at night
  • D. Detection in smoke and light fog conditions
  • E. License Plate Recognition

Answer: A,C,D

 

NEW QUESTION 41
Before upgrading firmware, which of the following should be checked?

  • A. Verify that both rack mounted and standalone servers support the latest firmware version
  • B. Verify that the SD card is properly ejected before the upgrade is started
  • C. Verify that the Video Management Software (VMS) supports the latest firmware version
  • D. Verify that the IEEE 802.3af compliant PoE switch supports the latest firmware version

Answer: C

 

NEW QUESTION 42
While setting up an AXIS Q7404 Video Encoder for control of an analog PTZ using Pelco D protocol, you run into a problem. After uploading of the proper Pelco drivers into the AXIS Q7404 Video Encoder you find that channel 1 is controlling the wrong analog PTZ. Which option below would you adjust to fix this problem so you can avoid changing physical cables?

  • A. Device type
  • B. Baud rate
  • C. Device ID
  • D. IP address

Answer: C

 

NEW QUESTION 43
What is 3D privacy masking?

  • A. A privacy mask that is changing its shape depending on angle of view
  • B. A privacy mask with three dimensions
  • C. A privacy mask that contains three individual set of blobs
  • D. A privacy mask that remains in the field of view

Answer: A

 

NEW QUESTION 44
Audio detection can be used

  • A. Only in quiet areas.
  • B. In all Axis cameras but an extra intelligent video (IV) module is necessary.
  • C. For detecting a change in decibel levels.
  • D. Only with cameras with built in microphone.

Answer: C

 

NEW QUESTION 45
Adding network surveillance cameras to an existing Ethernet network

  • A. Is not recommended, since bandwidth demands from the surveillance video would likely congest the network.
  • B. Will cause unacceptable video latency, due to the amount of UDP traffic taking precedence on the network.
  • C. Will benefit from establishing VPN connections to the cameras, reducing the risk of malicious users eavesdropping on the video.
  • D. Will benefit from using VLANs, to keep the surveillance video separate from other network traffic, reducing the risk for network congestion.

Answer: D

 

NEW QUESTION 46
Which of the following statements is a recommended best practice for outdoor installations of Axis cameras?

  • A. Connect cameras and end points (midspan, endspan. network switch or hub) with Category 5e UTP cable
  • B. Ensure that a surge suppressor is installed in front of each camera
  • C. Connect a UPS to the network switch
  • D. Ensure that the end points are properly grounded

Answer: D

 

NEW QUESTION 47
A Day & Night camera automatically removes the IR-cut filter for low light operations. In that mode, the camera becomes sensitive to IR light. Which wavelength is the camera most sensitive to?

  • A. 850 nm
  • B. 1140 nm
  • C. 950 nm
  • D. 1350 nm

Answer: A

 

NEW QUESTION 48
Which setting would best adjust a hard yellow tint as shown in the pictures below?

  • A. Color saturation
  • B. Image brightness
  • C. Image contrast
  • D. White balance

Answer: D

 

NEW QUESTION 49
......


Introduction of Axis ANVE Certification Exam

The Axis ANVE certification exam is the ultimate tool for professionals looking to enter the network video field and for individuals who want to prove their expertise. It is based on the Axis Network Video Expert (ANVE) analysis methodology and contains multiple-choice questions,fill-in-the-blank questions, and performance-based scenarios. Actually, the number of questions in this exam will be 220, divided into 3 sections. The first section consists of 100 multiple-choice questions (pre-requisite), which helps you learn what you know better. The second section consists of 60 multiple choice questions, which are divided into several sub-sections. It may include knowledge of installation and troubleshooting (35 questions), configuration (30 questions), and support (5 questions). Axis ANVE Dumps cover all questions of Axis ANVE. The last section consists of a performance-based scenario (10 questions). After completing each section, candidates will be given a break before starting the next part.

The whole exam will take about 3 hours to finish, including a 1-hour break in between. During the exam, a candidate has 20 minutes to answer each question. And there will be a timer on the screen to help you keep track of the time. If you want to have a fresh start on any question, you can choose the Restart button and move forward. The exam is not time-limited, so you can take as long as necessary to answer each question. There is no pass or fail score for the Axis ANVE certification exam, so giving it your best shot shouldn't be a problem. Your performance will be evaluated based on how many questions are answered correctly. In other words, even if you get every answer correct, there is no guarantee that you will pass this exam. If you want to take the Axis ANVE certification exam, you can visit your local Axis reseller or authorized training center. Or you can try to take this exam if you're about to attend an Axis event. The test will be given at many of Axis' domestic and international events, so if you run into one of those, don't hesitate to sign up. In order to take the ANVE certification exam, a candidate must be familiar with all parts of the test objectives and have current and practical knowledge in the field.

 

Q&As with Explanations Verified & Correct Answers: https://www.premiumvcedump.com/Axis/valid-ANVE-premium-vce-exam-dumps.html

Practice Exams and Training Solutions for Certifications: https://drive.google.com/open?id=1wYwj9JGTauSJdJ4JFTZs0YXlZFFKtcBT