Best ANVE Exam Dumps for the Preparation of Latest Exam Questions
ANVE Actual Questions 100% Same Braindumps with Actual Exam!
NEW QUESTION # 48
When dealing with a complicated lighting scenario, such as a camera inside looking out through bright windows, which camera would best adapt to the scene to provide the highest image detail?
- A. AXIS P3304
- B. AXIS Q1604
- C. AXIS P5534
- D. AXIS M3204
Answer: B
NEW QUESTION # 49
In setting up PTZ control for an Axis encoder, it's very easy to overlook a very important step in the configuration process. After properly connecting the communication wires to the encoder, the next recommended step in the setup is:
- A. Setting the Device ID to match the analog ID
- B. Setting the Baud Rate to match the analog PTZ' s
- C. Downloading the correct Device ID from the Axis website
- D. Uploading the correct PTZ driver
Answer: D
NEW QUESTION # 50
This image represents an enlargement of an actual surveillance image. How could you improve the overall quality of the image? (Choose two)
- A. Decrease the gain setting in the camera
- B. Increase the image compression setting
- C. Increase the gain setting in the camera
- D. Decrease image compression setting
- E. Change to a camera with higher resolution
Answer: D,E
NEW QUESTION # 51
Ghost image is when
- A. The gain is too high.
- B. The lens is using too high f-stop value.
- C. The frame rate is too low.
- D. The shutter time is too long.
Answer: D
NEW QUESTION # 52
Image flickering is caused by
- A. Fluorescent light
- B. IR light
- C. Lack of light
- D. White light
Answer: A
NEW QUESTION # 53
What are the effects of changing the capture mode on an AXIS P1346 from 2048x1536 (3 MP) to
1 920x1080 (HDTV)? (Choose two)
- A. Vertical angle of view decreases
- B. Minimum illumination decreases
- C. Maximum frame rate increases
- D. Maximum frame rate decreases
- E. Motion blur increases
Answer: A,C
NEW QUESTION # 54
A customer has a lot of motion blur on recordings from a fixed camera. What would be the most likely setting to address the blurring?
- A. Shutter speed
- B. Backlight compensation
- C. Gain level
- D. Brightness
Answer: A
NEW QUESTION # 55
In a switched network with Unicast
- A. All data packets are transmitted in a unified size, enabling network optimization.
- B. Only one camera at a time can send data packets through the network, to avoid congestion.
- C. Data packets are sent only to one recipient no other computers will receive the data.
- D. Data packets can only be sent in one direction, for example from the camera to the server.
Answer: C
NEW QUESTION # 56
The ONVIF standard gives the end user benefits such as (Choose two)
- A. Improving the performance of the system.
- B. Increased flexibility and greater freedom of choice.
- C. Future proof systems and more secure investments.
- D. Reduction of storage and network usage.
- E. Guarantees higher performance.
Answer: B,C
NEW QUESTION # 57
Which API is used to ensure interoperability between products from different vendors?
- A. HDTV
- B. AVHS
- C. VAPIX
- D. ONVIF
Answer: D
NEW QUESTION # 58
In which cases would a people counting analytic be used with an Axis camera (Choose three)?
- A. Statistics for retail stores
- B. Enhanced service levels for public transportation
- C. Crowd detection for marketing purpose
- D. Early warning system for flooding
- E. Fire protection in subways
Answer: A,B,C
NEW QUESTION # 59
AXIS Design Tool is used for
- A. Estimating bandwidth and creating a bill of materials.
- B. Plan network topology and determining camera coverage.
- C. Determining camera coverage and creating a bill of materials.
- D. Selecting the right cameras and choosing AXIS Camera Station licenses.
Answer: A
NEW QUESTION # 60
The first time an Axis camera's Live View is accessed the user is prompted to do which of the following?
- A. Enter a camera name
- B. Select a resolution
- C. Configure a root password
- D. Assign IP address
Answer: C
NEW QUESTION # 61
Axis recommends shielded cables for outdoor installations primarily to ensure
- A. Image quality.
- B. Life time of cable installations.
- C. Surge protection.
- D. Conformity with SMPTE standard.
Answer: C
NEW QUESTION # 62
To make use of IEEE 802.1 X when connecting a camera to the network, you need (Choose two)
- A. Category 6 or Category 5e Ethernet cabling.
- B. A server with a Gigabit Ethernet network card.
- C. An Ethernet switch with support for IEEE 302.1X.
- D. A router.
- E. A RADIUS server.
Answer: C,E
NEW QUESTION # 63
When using Axis' Corridor Format
- A. Privacy masks block out areas outside the specified corridor width.
- B. The depth of field is automatically adjusted to keep the entire length of a corridor in focus.
- C. The image is rotated 90 degrees, changing the aspect ratio to 9:16.
- D. Axis PTZ cameras can automatically track people walking down a corridor.
Answer: C
NEW QUESTION # 64
For which purposes would a thermal network camera be a viable alternative to a standard network camera? (Choose three)
- A. Detection at night
- B. License Plate Recognition
- C. Detection at daylight
- D. Detection in smoke and light fog conditions
- E. Identification of a person
Answer: A,C,D
NEW QUESTION # 65
......
ANVE Study Material, Preparation Guide and PDF Download: https://www.premiumvcedump.com/Axis/valid-ANVE-premium-vce-exam-dumps.html
Free ANVE Certification Sample Questions with Online Practice Test: https://drive.google.com/open?id=1FgoU8U1g5GH5mYYLQqYtUaI28iNmrAnF