Verified C-IBP-2105 dumps Q&As - 100% Pass from PremiumVCEDump
Pass C-IBP-2105 Exam in First Attempt Guaranteed 2022 Dumps!
SAP C-IBP-2105 Exam Description:
The "SAP Certified Application Associate - SAP Integrated Business Planning" certification exam verifies that the candidate possesses the basic knowledge in the area of the SAP supply chain planning. This certificate proves that the candidate has a basic overall understanding within this consultant profile of the industry solutions, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Integrated Business Planning. Please note that this 2105 version of the exam takes part in the Stay Current with SAP Global Certification program. Once you pass this version of the exam, make sure that you start your stay current process. You will be required to take the quarterly stay current assessment for all subsequent SAP IBP releases via the SAP Learning Hub starting with the 2108 release to maintain your SAP IBP consultant certification status and badge. In order to participate in the stay current program and access the stay current enablement and assessment, you will need at minimum an SAP Learning Hub, edition for IoT and Digital Supply Chain subscription. (https://training.sap.com/learninghub)
NEW QUESTION 47
Which of the following are features of the S&OP process templates? Note: There are 2 correct Answers to this question.
- A. Each step depicted in the template can have tasks associated with it.
- B. All process templates are assigned to dashboards.
- C. New instances of templates allow for re-use of the same processes again.
- D. The number of steps in a process template is the same for all implementations.
Answer: A,C
NEW QUESTION 48
For which of the following application jobs can you enter planning filters as parameters? Note: There are
2 correct Answers to this question.
- A. Create Time Periods for Time Profiles
- B. Purge Non-Conforming Data
- C. Purge Master Data
- D. Purge Key Figure Data
Answer: C,D
NEW QUESTION 49
Which of the following stages can be modeled using scenarios from the S&OP planning cycle? Note:
There are 2 correct Answers to this question.
- A. Data input review for inventory
- B. Demand review
- C. Demand sensing stage
- D. Demand-supply balancing
Answer: B,D
NEW QUESTION 50
You are adding a value-based filter to a planning view. Which of the following conditions apply? Note:
There are 3 correct Answers to this question.
- A. These filters can be used together with attribute totals in the same planning view.
- B. You can only apply one value-based filter per planning view.
- C. These filters are always applied based on the values stored in the database.
- D. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- E. You can add (or delete) planning objects to a planning view after these filters are applied.
Answer: B,C,D
NEW QUESTION 51
Which of the following is one of the functions of multi-echelon inventory optimization?
- A. Ability to optimize lead times between different locations
- B. Ability to optimize delivery costs between different locations
- C. Ability to maintain high external service levels with low internal service levels
- D. Ability to maintain high external service levels with high internal service levels
Answer: C
NEW QUESTION 52
You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer? Note:
There are 2 correct Answers to this question.
- A. Location Product Sub Cost Rate
- B. Flag 'Disable Substitution of Location Products'
- C. Promotion duration
- D. Loc-Prod Subst Valid-From Date
Answer: C,D
NEW QUESTION 53
You need to create time periods for the time profile in a planning are
a. What should you be aware of when executing the Create Time Periods application job?
- A. A time profile has to be activated so that the application job can proceed.
- B. This application job can be run for multiple time profiles at once.
- C. The planning area with this time profile must be activated so that the application job can proceed.
- D. This application job cannot be scheduled for immediate start.
Answer: C
NEW QUESTION 54
You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM? Note: There are 3 correct Answers to this question.
- A. Units of measure are usually not time-dependent.
- B. Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI
- C. Unit of measure is an attribute of a master data type, such as Product.
- D. Units of measure are usually not time-independent.
- E. Analytics provide the user with the option to select the target unit of measure.
Answer: A,C,E
NEW QUESTION 55
Which one of the following values can you use in disaggregation expressions?
- A. If (Attribute)=0
- B. KF1 (Stored) + Helper KF
- C. KF1 (Stored) + KF2 (Stored) + Attribute
- D. KF1 (Calculated) + Attribute
Answer: A
NEW QUESTION 56
Which of the following solutions are feasible when using the time series supply optimizer? Note: There are 3 correct Answers to this question.
- A. Violation of minimum aggregated inventory values
- B. Violation of minimum resource utilization
- C. Not respecting production capacity
- D. Not adhering to maximum transport values
- E. Not-fully satisfied demands
Answer: A,B,E
NEW QUESTION 57
Time profiles are made out of levels, which are in turn made out of periods. What are the ways SAP IBP identifies profiles and periods?
- A. Periods are identified by a start and end date and profiles by an integer.
- B. Both periods and profiles are identified by an integer.
- C. Periods are identified by an integer and profiles by an alphanumeric prefix.
- D. Periods are identified by an alphanumeric prefix and profiles by an integer.
Answer: A
NEW QUESTION 58
You are working with the inventory optimization process and you want to use a what-if analysis. What parameters are assessed by this analysis? Note: There are 2 correct Answers to this question.
- A. Number of planning combinations
- B. Changed variability
- C. Service levels
- D. Capacity consumption
Answer: B,C
NEW QUESTION 59
Which property of an attribute will allow it to be used as an attribute as a key figure?
- A. Type INTEGER
- B. Type TIMESTAMP
- C. Type DECIMAL
- D. Type NAVCHAR
Answer: C
NEW QUESTION 60
When you promote calculated and approved inventory parameters from SAP IBP for inventory, what other IBP modules can be receiving them? Note: There are 2 correct Answers to this question.
- A. SAP IBP for response and supply
- B. DDMRP
- C. SAP IBP for sales and operations
- D. SAP IBP for demand
Answer: A,C
NEW QUESTION 61
Which of the following key functions are supported by SAP IBP for sales and operations? Note: There are
2 correct Answers to this question.
- A. An advanced demand planning process
- B. Manual creation of feasible constrained plans
- C. Finite resource planning
- D. A basic demand planning process
Answer: C,D
NEW QUESTION 62
Which library is used by the forecasting engine for the demand sensing algorithm?
- A. Demand library
- B. Heuristics library
- C. Supply chain algorithm library
- D. Predictive analytics library
Answer: C
NEW QUESTION 63
Which of the following approaches could you take to reduce run times of an optimizer? Note: There are
2 correct Answers to this question.
- A. Use a subnetwork ID to reduce the size of the problem.
- B. Increase the use of incremental lot size beyond the frozen horizon.
- C. Avoid using telescopic time buckets.
- D. Split into multiple planning areas to support weekly vs. daily planning needs.
Answer: A,C
NEW QUESTION 64
Which of the following functional areas are included in the out-of-the-box SAP Integrated Business Planning application for sales and operations? Note: There are 3 correct Answers to this question.
- A. Consensus demand planning
- B. Demand-driven materials requirement planning
- C. Finite resource capacities planning
- D. Rough-cut supply planning
- E. Executive review
Answer: A,D,E
NEW QUESTION 65
Which SAP IBP planning operator can be run to delete planning objects in a certain version?
- A. Purge Master Data
- B. Purge Key Figure Data Outside Planning Area Planning Horizon
- C. Purge Non-Confirming Data
- D. Purge Key Figure Data
Answer: D
NEW QUESTION 66
Which of these conditions must be met to create a Local Member key figure?
- A. Use Excel Cell References in Report Editor is selected.
- B. Activate Local Member Recognition is selected.
- C. A key figure is created in the Planning Area app.
- D. A key figure is selected in the Key Figures tab in the Microsoft Excel add-in.
Answer: B
NEW QUESTION 67
You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check. Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.
- A. Change the description of the attributes in the time profile.
- B. Change the past and future horizon of the levels in the time profile.
- C. Add a new time profile level to the time profile.
- D. Remove an attribute assigned to the time profile level if the attribute is used in a planning level.
Answer: A,B
NEW QUESTION 68
Which of the following are functions of SAP IBP for demand? Note: There are 3 correct Answers to this question.
- A. Detailed statistical analysis of demand data using predictive analytics tools
- B. Embedded, on-the-fly demand analytics
- C. Detailed statistical analysis of demand data using the supply chain algorithm library
- D. Demand sensing of demand data using the supply chain algorithm library
- E. Demand sensing of demand data using predictive analytics tools
Answer: A,B,D
NEW QUESTION 69
Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results? Note: There are 2 correct Answers to this question.
- A. The length of the attribute needs to be 18 digits.
- B. It belongs to a simple or compound master data type.
- C. It should be a non-key attribute of the master data type.
- D. Its data type is INTEGER and its length has been specified.
Answer: B,C
NEW QUESTION 70
What type of key figure requires a planning level to have all attributes as roots?
- A. The attribute transformation key figure, such as PERIODID1
- B. The time independent key figure, such as FCSTMAPE
- C. The special key figure marked as an aggregate key figure
- D. The conversion key figure, such as exchange rate
Answer: C
NEW QUESTION 71
......
SAP IBP Certification Exam Details:
| Reference Books | IBP100, IBP110, IBP200, IBP700, IBP300, IBP600 |
| Exam Code | C_IBP_2105 |
| Number of Questions | 80 |
| Exam Name | SAP Certified Application Associate - SAP Integrated Business Planning |
| Duration | 180 mins |
| Exam Price | $550 (USD) |
| Schedule Exam | SAP Training |
C-IBP-2105 Dumps Full Questions - Exam Study Guide: https://www.premiumvcedump.com/SAP/valid-C-IBP-2105-premium-vce-exam-dumps.html