Updated Sep-2021 Test Engine to Practice Test for 220-1001 Exam Questions and Answers!
CompTIA A+ Certification Exam: Core 1 Certification Sample Questions and Practice Exam
NEW QUESTION 162
A user from a remote office is trying to connect lo the wireless network at the corporate headquarters but is unable to find It. After calling the help desk, the user receives the following credentials to connect to the network:
The user enters the credentials as given but is still unable to connect to the wireless network. Which of the following should the user try FIRST to connect to the network?
- A. Install a new wireless card.
- B. Check If another device can see the network.
- C. Check for the proper credentials.
- D. Enter the SSID of the network manually.
Answer: C
NEW QUESTION 163
An end user wants to have a second monitor installed on a laptop. Which of the following would allow a
technician to configure the laptop to show both screens once the cable is connected?
- A. Use the Fn and function key combination
- B. Enable DisplayPort.
- C. Adjust the monitor display settings.
- D. Plug an external monitor into the USB port.
Answer: C
NEW QUESTION 164
A user from a remote office is trying to connect lo the wireless network at the corporate headquarters but is unable to find It. After calling the help desk, the user receives the following credentials to connect to the network:
The user enters the credentials as given but is still unable to connect to the wireless network. Which of the following should the user try FIRST to connect to the network?
- A. Install a new wireless card.
- B. Check If another device can see the network.
- C. Check for the proper credentials.
- D. Enter the SSID of the network manually.
Answer: C
NEW QUESTION 165
A technician is deploying a wireless access point for streaming 4K videos and online gaming. Which of the following wireless frequencies is MOST appropriate in this scenario?
- A. 2.4GHz
- B. 5GHz
- C. 1300MHz
- D. 900MHz
Answer: B
NEW QUESTION 166
A customer is having a problem with a newly installed home network. Three computers and a cable modern are connected into a SOHO router with Cat 5e cables. Computer 1 is able to access the Internet; however, Computer 2 and Computer 3 have no Internet access. A technician runs the ipconfig command on Computer 1:
Computer 1:
IPv4 address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 193.134.4.1
The technician then runs the ipconfig command on two other computers that are NOT able to access the Internet:
Computer 2:
IPv4 address: 192.168.1.101
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Computer 3:
IPv4 address: 192.168.1.102
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Which of the following is the MOST likely reason Computer 2 and Computer 3 cannot access the Internet?
- A. The DHCP client service is disabled on Computer 2 and Computer 3. The service should be enabled to receive the correct network settings.
- B. The subnet masks are misconfigured on Computer 2 and Computer 3. The subnet mask on both computers should be set to 255.255.252.0.
- C. Computer 2 and Computer 3 are not receiving a response from the router's DHCP service. The technician should enable DHCP.
- D. The gateways are misconfigured on Computer 2 and Computer 3. The gateways on both computers should be set to 193.134.4.1
Answer: D
NEW QUESTION 167
A systems administrator is configuring a server to host several virtual machines. The administrator configures the server and is ready to begin provisioning the virtual machines.
Which of the following features should the administrator utilize to complete the task?
- A. Disk management
- B. Hypervisor
- C. Device Manager
- D. Terminal services
- E. Virtual LAN
Answer: B
NEW QUESTION 168
A junior technician is working on a new server that will Intercept web traffic and file requests from users computers and retrieve the necessary content. Which of the following is the technician configuring?
- A. Web server
- B. Authentication server
- C. Proxy server
- D. File server
- E. DNS server
- F. DHCP server
Answer: C
NEW QUESTION 169
A laptop user wants to connect three screens to a computer. The computer only has VGA and HDMI outputs. Which of the following would enable the user to accomplish this? (Select two.)
- A. NFC
- B. Docking station
- C. USB-to-DVI adapter
- D. USB-to-RJ-45 adapter
- E. Bluetooth
- F. DisplayPort-to-HDMI adapter
Answer: B,C
NEW QUESTION 170
A technician receives multiple calls from users stating that documents submitted to a shared printer are not printing. The technician can ping the device to confirm it is powered on and connected to the network. The technician successfully prints a test page from the device control panel. Which of the following should the technician perform NEXT?
- A. Restart the print spooler
- B. Reconfigure TCP/IP settings
- C. Remove and reinstall the printer
- D. Reinstall the print drivers
Answer: A
NEW QUESTION 171
A customer accidentally drops a laptop while it is charging. The next day, the customer notices the laptop
will not turn on and calls a technician to investigate. The technician confirms the laptop will not turn on and
calls a technician to investigate. The technician confirms the laptop will not turn on even though it is
connected to the power adapter.
Which of the following components is the MOST likely cause of this behavior?
- A. DC jack
- B. Battery
- C. Hard drive
- D. Power adapter
Answer: A
NEW QUESTION 172
A company needs to implement data protection and local drive redundancy on a few workstations. To accommodate these needs, the company is having a network storage device installed so it can perform nightly backups.
Which of the following are MOST necessary for this device? (Select TWO).
- A. RAID array
- B. High-end cooling
- C. Gigabit NIC
- D. High-end video
- E. Maximum RAM
- F. Hyperthreading CPU
Answer: A,C
NEW QUESTION 173
A customer, Ann, has requested two custom PCs, one to be used for gaming and the other to be used as a virtualization workstation for her business.
The gaming PC should support the latest games and gaming peripherals.
The virtualization workstation should be able to host several production virtual machines as part of Ann's home business.
INSTRUCTIONS
Use the tabs at the top to switch between the PCs.
Objects should be placed on the appropriate slot/display areas and can only be used once.
All slot/display areas should be filled.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Answer:
Explanation:
NEW QUESTION 174
A user is unable to access network resources on a laptop. A technician examines the device and attempts to reproduce the issue. The technician cannot connect to resources by name or IP. Which of the following should the technician check FIRST?
- A. Upstream router WAN IP
- B. DHCP server availability
- C. AP power levels
- D. Wireless button state
Answer: D
NEW QUESTION 175
Using cloud-based servers is an example of:
- A. DBaaS.
- B. PaaS.
- C. laaS.
- D. SaaS.
Answer: C
NEW QUESTION 176
A technician is selecting a long VGA cable to run through the walls and ceiling to a projector. Which of the following cable features will help minimize interference with the video signal?
- A. Ferrite core
- B. Copper conductors
- C. Fiber
- D. Plenum
Answer: D
NEW QUESTION 177
A computer freezes shortly after loading the operating system. A technician inspects the computer and obtains the following diagnostic information:
Which of the following should the technician investigate further?
- A. The CPU temperatures
- B. The GPU temperatures
- C. The power supply voltage
- D. The integrity of the hard drive
- E. The memory clock speed settings
Answer: A
NEW QUESTION 178
......
Certification dumps A+ 220-1001 guides - 100% valid: https://www.premiumvcedump.com/CompTIA/valid-220-1001-premium-vce-exam-dumps.html
100% Pass Your 220-1001 CompTIA A+ Certification Exam: Core 1 at First Attempt with PremiumVCEDump: https://drive.google.com/open?id=1s0rVVUAgPfTMnWaIQ2VlS5xTLpvsJX4I