Updated Apr-2025 Pass C_THR92_2411 Exam - Real Practice Test Questions
Download Free SAP C_THR92_2411 Real Exam Questions
SAP C_THR92_2411 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 19
You are using a Multi-Dataset table report without Business Intelligence Reporting Tools (BIRT).What are characteristics of the report output?Note: There are 2 correct answers to this question.
- A. Data is joined in the query.
- B. Report results are shown on a single tab in the output.
- C. Report results are shown on separate tabs in the output.
- D. Data is NOT joined in the query.
Answer: B
NEW QUESTION # 20
If you want to create a single filter that utilizes criteria from multiple tables in the same query, which filter do you need to use?
- A. Query Scope filter
- B. Table Advanced filter
- C. Query Advanced filter
- D. Table Simple filter
Answer: C
NEW QUESTION # 21
When using Report Center, what permissions are required to create a canvas report on Employee Profile data using the Detailed Reporting tool?
Note: There are 3 correct answers to this question.
- A. Report - Canvas Designer
- B. Run Report: Employee Profile
- C. Report Center
- D. Report - Canvas Designer Admin
- E. Create Reports: Employee Profile
Answer: A,C,D
NEW QUESTION # 22
You are creating a query that lists employee information such as name, address, and dependent information. The query uses Personal Information as the driving table and joins the Dependents and Address tables. You notice many employees are missing from the result set.
What are the reasons?
- A. Personal Information is joined to both the Dependents table and the Address table with a left join.
- B. Personal Information is joined to both the Dependents table and the Address table with an inner join.
- C. Personal Information is joined to Address table with a left join and the Address table is joined to the Dependents table with a left join.
- D. Personal Information is joined to Dependents table with a left join and the Dependents table is joined to the Address table with a left join.
Answer: B
NEW QUESTION # 23
The drill-down list of a tile contains more entries than the values displayed in a chart (see attached image).
How do you make the outputs match?
- A. Remove the category assignment field.
- B. Remove the column that would generate multiple entries per metric.
- C. Change the metric calculation from Count to Count distinct.
- D. Configure a filter to remove the duplicate column.
Answer: D
NEW QUESTION # 24
You are creating a query for a historical compensation story report in Query Designer. You have added the Job Information table to the query, configured a scope filter, and previewed the result to verify you are returning the appropriate employees.
You add the related table Compensation to the query.
When you preview the query, you only get the current compensation information for the employees.
Why do you only receive the current records?
Note: There are 2 correct answers to this question.
- A. The Job information table time filter is set to: As of Date > Dynamic Date: Today.
- B. The compensation table time filter is set to: As of Date > Dynamic Date: Today.
- C. The compensation table time filter is set to: Same Filter as First Table.
- D. The Query Advanced Filter is set to: Job Information effective start date equal to Dynamic Date: Today.
Answer: A,C
NEW QUESTION # 25
The data source used by the two tables only displays current (active) employees. How would you configure a filter on the table End of Previous Year Headcount by Location to display data accurately? Note: There are 2 correct answers to this question.
- A. Set a filter on Hire Date (Member).
- B. Set a filter on Hire Date (Range).
- C. Set the Range type to Standard.
- D. Set the Range type to Offset.
Answer: B,D
NEW QUESTION # 26
Within a Story, you create a query using the Basic User Information table. After you add the Proxy Information table, you notice that some of the basic information records are NO longer displayed in the preview. How do you adjust the query to return the missing records in the preview?
- A. Change the join type to Inner Join.
- B. Change the join type to Left Outer Join.
- C. Remove the related table and select and drag it from the Available Data section.
- D. Remove the related table and add it using the Show Related Tables command from the Action Menu.
Answer: B
NEW QUESTION # 27
In the Advanced Reporting tool, you want to create a query that includes the employee's matrix manager. When you configure the table join with the Job Relationships table, the Results tab displays multiple rows per employee that also include relationships to HR managers and second managers. How do you configure the query to return one row per employee that shows the employee's matrix manager, when assigned?
- A. Change the Job Relationship to include a table restriction.
- B. Change the Job Relationship join to an inner join.
- C. Change the Job Relationship join to a left join.
- D. Change the Job Relationship join to a right join.
Answer: A
NEW QUESTION # 28
In Query Designer, you are trying to create a conditional expression to relabel a field. You create the following expression:IF([User#Basic User Information#Gender] = "M" , "Male" : "Female")You received an error message saying the formula could NOT be computed. Which symbol in your expression is causing the error?
- A. ,
- B. #
- C. "
- D. :
Answer: D
NEW QUESTION # 29
When you share a tile, where can the user view that tile?Note: There are 3 correct answers to this question.
- A. Home Page
- B. Insights panel
- C. Custom table report
- D. Canvas Report
- E. Dashboard
Answer: A,B,E
NEW QUESTION # 30
What are the steps to create and assign a date filter to a tile?
- A. 1. Enable the date filter in the tile.
2. Create a new date range.
3. Configure the Name, label and date from/date to.
4. Configure end user free selection of date range. - B. 1. Access Date Options.
2. Configure the date type to Date Range.
3. Configure the date from/date to.
4. Enable the date filter in the tile.
5. Configure end user free selection of date range. - C. 1. Enable the date filter in the tile.
2. Access Date Options.
3. Configure date type to Date Range.
4. Configure the date from/date to.
5. Configure end user free selection of date range. - D. 1. Create a new date range.
2. Configure the Name, label and date from/date to.
3. Enable the date filter in the tile.
4. Configure end user free selection of date range.
Answer: B
NEW QUESTION # 31
In addition to any chart filter you may have applied to your chart, which other filters may be affecting the chart filter, due to the Cascading effect?
Note: There are 2 correct answers to this question.
- A. Query
- B. Table
- C. Story
- D. Page
Answer: A,C
NEW QUESTION # 32
In Detailed Reporting, you want to build a query for a cross-domain report. What does the system do with fields that are NOT available for this report?
- A. Unavailable fields are moved to the bottom of the list.
- B. Unavailable fields are marked gray.
- C. Unavailable fields are hidden.
- D. Unavailable fields are marked red.
Answer: B
NEW QUESTION # 33
You are configuring a story report. You add the image widget to the top-left corner of the canvas. You then upload the SuccessFactors logo in the Builder and select the logo image so it displays on the canvas. When you preview the report in View Mode, the logo appears centered on the canvas.
What action do you take so the Logo appears in the top-left corner when viewing the report in view mode?
- A. In Builder for the image, set the image to Dynamic.
- B. In Designer Mode, add another widget under the image.
- C. In Styling for the page, set the Page Size to Fixed.
- D. In Styling for the image, set the Image Properties to Pan.
Answer: B
NEW QUESTION # 34
You are creating a calculated column to calculate an employee's organizational tenure.
Why does the formula in the screenshot result in an error?
- A. The result of the formula is negative.
- B. An incorrect dynamic date variable has been used.
- C. An "if then else" statement needs to be included.
- D. An incorrect data type has been selected.
Answer: B
NEW QUESTION # 35
You want to create a page in a canvas report that includes a custom image, a user editable title centered underneath the image, and the current date in the top-right corner. Which combinations of components can you use to accomplish this? Note: There are 2 correct answers to this question.
- A. 1 custom image component, 1 rich text component, 1 simple text component
- B. 1 custom image component, 2 rich text components
- C. 1 custom image component, 1 rich text component
- D. 1 custom image component, 1 simple text component
Answer: A,B
NEW QUESTION # 36
Which of the following would make it possible for a filter to update multiple charts using linked analysis?
Note: There are 2 correct answers to this question.
- A. The charts should have the same data source.
- B. The data sources for the charts should contain linked dimensions.
- C. The chart should use the same aggregation.
- D. The charts should use the same measures.
Answer: B,D
NEW QUESTION # 37
You are using a pivot table in your canvas report but the report does NOT display the most recent data.
What could be the reason?
- A. You are using the percent of total option.
- B. You are using a wrong People Scope.
- C. You are NOT using a template.
- D. You are using a query with a static date filter.
Answer: D
NEW QUESTION # 38
You are creating a Story report on Job Classifications. You have configured the chart, table, and input control on the canvas as displayed in the screenshot.
How do you set the input control?
- A. Create the corresponding filter on each chart.
- B. Configure it for Linked Analysis.
- C. Convert it to a Story Filter.
- D. Enable Cascading Effects.
Answer: A
NEW QUESTION # 39
Which actions can you permit the report consumer to perform by your configuration of Interactive widgets?
Note: There are 3 correct answers to this question.
- A. Add/delete widgets.
- B. Show/hide labels.
- C. Switch between edit and view mode.
- D. Adjust filters within controls.
- E. Freeze table rows/columns.
Answer: B,D,E
NEW QUESTION # 40
What provisioning setting must you enable to allow customers to upload a custom BIRT template to a Table Report?
- A. Enable BIPublisher to BIRT Template Converter.
- B. Allow BIPublisher template upload.
- C. Enable Visual Publisher.
- D. Additional Adhoc Subdomain Schemas Configuration.
Answer: C
NEW QUESTION # 41
You are constructing a Story. You want to return the quarter to date event records to count terminations. Which options would you set in the time filter? Note: There are 3 correct answers to this question.
- A. Range Parameters: Period to Date
- B. Range Type: fixed
- C. Range Type: dynamic
- D. Records Returned: Include only records that begin in your defined date range
- E. Range period: Actual start/end date of the current quarter
Answer: A,C,D
NEW QUESTION # 42
......
C_THR92_2411 Dumps 100 Pass Guarantee With Latest Demo: https://www.premiumvcedump.com/SAP/valid-C_THR92_2411-premium-vce-exam-dumps.html
Pass Your Exam With 100% Verified C_THR92_2411 Exam Questions: https://drive.google.com/open?id=1QiTQJNWcx4ve4NgLxitRUX76SPABzPQB