Excellent 300-630 PDF Dumps With 100% PremiumVCEDump Exam Passing Guaranted [Oct-2021]
100% Pass Your 300-630 Implementing Cisco Application Centric Infrastructure - Advanced at First Attempt with PremiumVCEDump
How to plan CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA)
You can for the most part plan a test as long as about a month and a half ahead of time and as late as that very day.
- For CCIE Lab Exams, visit the CCIE site
- For tests other than CCIE lab tests, plan your test at Pearson VUE. Visit the Exam Registration Information page for subtleties
- Candidates who bomb a test should stand by a time of 5 schedule days, starting the day after the bombed endeavor, before they may retest for a similar test
- Candidates who bomb any CCIE or CCDE composed test should sit tight for a time of 15 schedule days, starting the day after the bombed endeavor, prior to retaking a similar test
NEW QUESTION 26 
Refer to the exhibits. Which subject must be configured for the All_noSSH contract to allow all IP traffic except SSH between the two EPGs?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Section: Advanced ACI Policies and Integrations
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/ b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_010.html
NEW QUESTION 27
An organization expands a Cisco ACI Multi-Pod from two to six pods and must ensure that the control plane scales. What should be configured in the IPN to ensure that BUM traffic is forwarded efficiently across the IPN?
- A. BIDIR-PIM
- B. spine headend replication
- C. MSDP
- D. MP-BGP
Answer: A
NEW QUESTION 28
Refer to the exhibits.
Which subject must be configured for the All_noSSH contract to allow all IP traffic except SSH between the two EPGs?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: A
NEW QUESTION 29 
Refer to the exhibit. A customer experiences resource overconsumption on one of its border leaf switches.
Which action should be taken to reduce the consumption on this switch?
- A. Disable VRF Policy Control Enforcement
- B. Disable Remote EP Learning
- C. Migrate L3Outs to another switch
- D. Disable IP Data Plane Learning
Answer: D
Explanation:
Section: Advanced ACI Policies and Integrations
NEW QUESTION 30
What is the purpose of the Forwarding Tag (FTAG) in Cisco ACI?
- A. FTAG is used in Cisco ACI to add a label to the iVXLAN traffic in the fabric to apply the correct policy.
- B. FTAG trees in Cisco ACI are used to load balance mutli-destination traffic.
- C. FTAG is used in Cisco ACI to add a label to the VXLAN traffic in the fabric to apply the correct policy.
- D. FTAG trees in Cisco ACI are used to load balance unicast traffic.
Answer: B
Explanation:
Section: ACI Packet Forwarding
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/ b_ACI-Fundamentals/b_ACI- Fundamentals_chapter_010010.html#concept_1E8BF286E1C043EF839D80935FDF9F50
NEW QUESTION 31
Refer to the exhibit.
Which two configuration steps are required in ISN for Cisco ACI Multi-Site setup? (Choose two.)
- A. Connect Spine2 to ISN routers.
- B. Configure BIDIR-PIM throughout the ISN
- C. Enable IGMPv3 on ISN routers
- D. Configure OSPF between spines and ISN routers
- E. Increase ISN MTU to support the maximum MTU that is sent by endpoints
Answer: C,D
NEW QUESTION 32
Where are STP BPDUs flooded in Cisco ACI fabric?
- A. in the access encapsulation VLAN part of different VLAN pools
- B. in the native VLAN ID
- C. in the bridge domain VLAN
- D. in the VNID that is assigned to the FD VLAN
Answer: C
Explanation:
Section: Traditional network with ACI
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-737909.html
NEW QUESTION 33
Refer to the exhibit.
How are the STP BPDUs forwarded over Cisco ACI fabric?
- A. STP BPDUs that are generated by Switch1 are received only by Switch3.
- B. Cisco ACI acts as the STP root for all three external switches.
- C. STP BPDUs that are generated by Switch2 are received by Switch1 and Switch3.
- D. Cisco ACI fabric drops all STP BPDUs that are generated by the external switches.
Answer: C
NEW QUESTION 34
An engineer must migrate servers from a legacy data center infrastructure to a Cisco ACI fabric. Drag and drop the steps from the left into the order that they must be completed on the right to ensure the least amount of downtime.
Answer:
Explanation:
NEW QUESTION 35
An engineer must allow routes learned from one L3Out to be advertised out another L3Out. The engineer does not have an explicit list of all the routes that must be advertised out, however, they know that they are all part of the 10.16.0.0/16 CIDR block. Which attributes must be selected under Ext-EPG to allow the necessary routes to be advertised out?
- A. Enable Export Route Control Subnet and enable Shared Route Control Subnet
- B. Disable Shared Route Control Subnet and enable Aggregate Shared Routes
- C. Enable Export Route Control Subnet and enable Aggregate Export
- D. Enable Export Route Control Subnet and disable Aggregate Shared Routes
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/ b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_01001.html
NEW QUESTION 36
What is a characteristic of a stretched bridge domain solution between Cisco ACI sites with Layer 2 flood disabled?
- A. Headend replication is used for BUM traffic between sites.
- B. IP mobility is ensured between sites for disaster recovery.
- C. The application profile that is associated to the bridge domain have local significance in each site.
- D. The tenant and VRF that associated to the bridge domain have local significance in each site.
Answer: D
NEW QUESTION 37
Which two actions should be taken to ensure a scalable solution when multiple EPGs in a VRF require unrestricted communication? (Choose two.)
- A. Set the EPGs that require policy enforcement between each other as preferred group members.
- B. Set the VRF policy control enforcement preference to Unenforced.
- C. Configure a taboo contract between the EPGs that require unrestricted communication between each other.
- D. Set the EPGs that require unrestricted communication between each other as preferred group members.
- E. Enable Preferred Group Member under the EPG Collection for VRF section.
Answer: B,D
Explanation:
Section: Advanced ACI Policies and Integrations
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/basic-configuration/ Cisco-APIC-Basic-Configuration-Guide-42x/Cisco-APIC-Basic-Configuration-Guide-42x_chapter_0110.html
NEW QUESTION 38 
Refer to the exhibit. Which configuration mode must be selected for the VMM vSwitch Port Channel policy to avoid MAC flapping on the Cisco UCS Fls and Cisco ACI leaf switches?
- A. LACP Active
- B. LACP Passive
- C. MAC Pinning
- D. Static Channel - Mode On
Answer: C
Explanation:
Section: Advanced ACI Policies and Integrations
NEW QUESTION 39
Which action should be taken in Cisco ACI to reassign a unique globally scoped pcTag to an EPG that provides a global contract?
- A. Configure subnets that are shared between VRFs
- B. Configure subnets that are treated as virtual IP
- C. Configure subnets that advertise externally
- D. Configure subnets that are private to VRF
Answer: A
NEW QUESTION 40
An engineer configures a new Cisco ACI Multi-Site Orchestrator node to join an MSO cluster. Which two components are necessary to ensure that the new node has IP connectivity in this configuration? (Choose two.)
- A. management IP of ESXi hosts where the controllers are deployed
- B. OOB interface of ISN
- C. Cisco ACI spine interfaces that are connected to ISN
- D. existing Cisco ACI Multi-Site Orchestrator node
- E. Cisco APICs over the OOB management network
Answer: D,E
NEW QUESTION 41
Refer to the exhibit.
Which configuration mode must be selected for the VMM vSwitch Port Channel policy to avoid MAC flapping on the Cisco UCS Fls and Cisco ACI leaf switches?
- A. LACP Active
- B. LACP Passive
- C. MAC Pinning
- D. Static Channel - Mode On
Answer: C
NEW QUESTION 42
An organization migrates its virtualized servers from a legacy environment to Cisco ACI. VM1 is incorrectly attached to PortGroup IT|3TierApp|Web. Which action limits IP address learning in BD1?
- A. Enable Rouge Endpoint Control
- B. Enable Enforce Subnet Check
- C. Enable GARP-based EP Move Detection Mode
- D. Disable Remote EP Learn
Answer: C
NEW QUESTION 43 
Refer to the exhibit. A network engineer configures a Layer 4 to Layer 7 device for an outside routed firewall that is connected to POD-1 inside a Cisco ACI fabric that consists of two pods. All traffic from POD-1 or POD-2 that uses the L3Out should pass through the routed firewall. Which Function Type must be implemented in the service graph for POD-2 to use L3Out?
- A. L1
- B. GoTo
- C. L2
- D. GoThrough
Answer: C
Explanation:
Section: Multipod
NEW QUESTION 44
What is the purpose of the Forwarding Tag (FTAG) in Cisco ACI?
- A. FTAG is used in Cisco ACI to add a label to the iVXLAN traffic in the fabric to apply the correct policy.
- B. FTAG trees in Cisco ACI are used to load balance mutli-destination traffic.
- C. FTAG is used in Cisco ACI to add a label to the VXLAN traffic in the fabric to apply the correct policy.
- D. FTAG trees in Cisco ACI are used to load balance unicast traffic.
Answer: B
NEW QUESTION 45
Refer to the exhibit.
An engineer must have communication between EPG1 in VRF1 and External EPG in VRF2. Which three actions should be taken for the defined subnets in the L3Out External EPG to accomplish this goal? (Choose three.)
- A. Enable Aggregate Shared Routes
- B. Enable Shared Route Control Subnet
- C. Enable Import Route Control Subnet
- D. Enable External Subnets for External EPG
- E. Enable Export Route Control Subnet
- F. Enable Shared Security Import Subnet
Answer: C,E,F
NEW QUESTION 46
Refer to the exhibit.
Between Cisco UCS Fls and Cisco ACI leaf switches, CDP is disabled, the LLDP is enabled, and LACP is in Active mode. Which two discovery protocols and load-balancing mechanism combinations can be implemented for the DVS? (Choose two.)
- A. CDP enabled, LLDP disabled, and MAC Pinning
- B. CDP disabled, LLDP enabled, and MAC Pinning
- C. CDP enabled, LLDP disabled, and LACP Passive
- D. CDP disabled, LLDP enabled, and LACP Passive
- E. CDP enabled, LLDP disabled, and LACP Active
- F. CDP enabled, LLDP enabled, and LACP Active
Answer: B,C
NEW QUESTION 47
......
Who should take the CISCO 300-630 Implementation of Application Centric Infrastructure Advanced (DCACIA)Exam
The certification is fashioned for:
- Field engineers
- Consulting systems engineers
- Technical solutions architects
- Data center engineers
- Network managers
- Cisco integrators and partners
- Network administrators
- Network designers
- Server administrators
- Network engineers
- Systems engineers
- Storage administrators
Trend for 300-630 pdf dumps before actual exam: https://www.premiumvcedump.com/Cisco/valid-300-630-premium-vce-exam-dumps.html
Real Exam Questions & Answers - Cisco 300-630 Dump is Ready: https://drive.google.com/open?id=1onigWIFMxHFprB6cH2Q4U-jxRizBGf5T