Pass Your Exam Easily! 301a Real Question Answers Updated on Jan 10, 2025
Actual Questions Answers Pass With Real 301a Exam Dumps
F5 301a exam is an essential certification for IT professionals who want to advance their knowledge and career in application delivery network services. It covers the latest technologies and best practices in the industry and is designed to test the practical skills of the candidate in a real-world environment.
To pass the F5 301a exam, candidates must demonstrate their understanding of network traffic management and the use of BIG-IP LTM to optimize application delivery. They must also show their ability to design and deploy F5 BIG-IP LTM solutions to meet specific business requirements. 301a exam is designed to test candidates' knowledge and skills in using F5 BIG-IP LTM to improve application performance, increase availability, and enhance security. Upon passing the exam, candidates will be awarded the F5 Certified BIG-IP LTM Specialist: Architect Set-Up & Deploy certification, which is highly valued in the IT industry.
F5 301a exam is designed for professionals who want to become an F5 Certified BIG-IP LTM Specialist: Architect Set-Up & Deploy. BIG-IP LTM Specialist: Architect Set-Up & Deploy certification is ideal for individuals who want to demonstrate their skills in designing, configuring, and deploying F5 BIG-IP Local Traffic Manager solutions. 301a exam covers a range of topics, including application delivery fundamentals, network fundamentals, and F5 BIG-IP LTM architecture and configuration.
NEW QUESTION # 73
An LTM Specialist needs to add a pool that will load balance MYSOL services. It has four members, each with differing hardware platforms. All pool members are already assigned to another pool for load balancing FTP traffic.
Which load balancing method is most effective when the LTM Specialist sets up the pool?
- A. Predictive member)
- B. Round Robin
- C. Observed (node)
- D. Least Connections (node)
Answer: C
NEW QUESTION # 74
A web server is being overloaded with HTTPS traffic. To decrease the load on the server, the LTM Specialist and the Server. Administrator decide to perform SSL offloading on the LTM device. The configuration of the virtual server is as follows:
Which change must be made to the configuration to perform SSL offloading?
- A. Remove the clientssl and http profiles
- B. Remove the severssl profile
- C. Remove the clientssl and serverssl profiles
- D. Remove the clients profile
Answer: B
NEW QUESTION # 75
An LTM Administrator receives an email from the NOC stating that the switch connected to the backend server was shut down for maintenance. The BIG-IP device handles only UDP traffic. The BIG IP device did not fail over to a DR location when no pool members were available.
When the LTM Administrator checks the pool, it confirms that the monitor is still marking UP the pool member.
A tcpdump of the traffic shows the following output:
A list of the monitor configuration shows the following:
Which two modifications to the LTM configuration will mark this pool member down, when the switch is down? (Choose two.)
- A. increase the timeout to three times the interval
- B. enable reverse and wait for the next connection
- C. add a reverse string to the game monitor
- D. also assign a gatewayjcmp monitor to the pool
- E. enable manuai-resume on the same monitor
Answer: C,D
NEW QUESTION # 76
An LTM Specialist needs to provide statistics regarding the round-trip time between the clients and the servers.
Which metric should be part of the analytics profile to provide that information?
- A. Response Codes
- B. User Sessions
- C. Max TPS and Throughout
- D. Page Load Time
Answer: D
NEW QUESTION # 77
An ITM Specialist has the configuration shown:
The LTM Specialist needs to create a new virtual server in part B.
Which virtual address(es) should be used for the new virtual server?
- A. 10.100.0.1 and.10.120.0.1
- B. 10.120.0.1 only
- C. 10.90.0.1 and 10.100.0.1
- D. 10.90.0.1 and 10.12.0.1
Answer: A
NEW QUESTION # 78
An LTM Specialist decides to offload SSL traffic on the LTM device instead of just passing it through. The LTM Specialist needs to change the configure from a Performance (Layer 40 virtual server to a Standard virtual server with SSL offload.
Which two element the LTM Specialist consider when performance this task? (Choose two.)
- A. Connection mirroring
- B. CPU load
- C. Port exhaustion
- D. Sensitive connections
- E. Memory load
Answer: B,E
NEW QUESTION # 79
TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.
What is causing the change in failover state to occur?
- A. The HA network is using the default routing domain.
- B. The HA network latency is too high.
- C. The HA network is using multicast IP.
- D. The HA network is not configured for mirroring.
Answer: C
Explanation:
NEW QUESTION # 80
An LTM device load balances a pool of routers. The LTM device needs to verify path availability to an HTTP server with the IP address 192 168.10 10. located beyond the routers.
Which monitor type and parameters arc required?
- A. TCP monitor, change transparent option to Yes, and sot the alias to port 80
- B. TCP monitor, alias address 192.168.10.10. and set the alias to port 80
- C. HTTP monitor alias address 192 168.10 10. and set the alias to port 80
- D. TCP monitor change transparent option to Yes. set alias address 192.168.10.10. and set the alias to port 80
Answer: D
NEW QUESTION # 81
Four members in a server pool have similar hardware platforms. An LTM Specialist needs the load balancing method that can select the server with the fewest entries in the persistence table.
Which load balancing method should the LTM Specialist use?
- A. Dynamic Ratio
- B. Observed
- C. Leas Connections
- D. Least Sessions
Answer: D
Explanation:
Pay attention to the examination questions, the stem is to ask the session to keep the minimum entries in the table.
NEW QUESTION # 82
An LTM Specialist needs to gather website statistics such as latency and throughput on the existing virtual server. This virtual server load Balances the backend web servers.
Which F5 feature will provide this?
- A. the Dashboard
- B. the AVR module
- C. the Performance panel
- D. the Statistics panel
Answer: B
NEW QUESTION # 83
An LTM Specialist has recently taken over administration or an LTM device that has experienced resource availability issues. The LTM device will need to be solely used for load balancing and SSL offload. Previously, the LTM device was also used to provide statistical analysis of application traffic. However, that functionality has been moved to a third party solution.
Based on the output below, which configuration change should be made to ensure the LTM module receives the most amount of resources?
- A. Provision AVR to Minimum, Provision LTM to Dedicated
- B. Provision AVR to none. Provision LTM to Dedicated
- C. Provision AVR to Minimum. Provision LTM at Maximum
- D. Provision LTM to Dedicated, Provision AVR to Dedicated
Answer: B
NEW QUESTION # 84
An LTM specialist needs to upgrade a VCMP quest in an HA Setup with minimum interruption for all VCMP guest instances.
In which should the LTM Specialist perform this upgrade?
- A. Failover all guests' active traffic-group to the other host, copy image to guest, create guest UCS install and set boot location to new volume, reboot, Relicense the host
- B. Failover this specific guest's active traffic-group to the other Host, Relicense the guest, copy image to guest , create guest UCS, install and set boot location to new volume, reboot
- C. Failover all guests' active traffic-group to the other Host, Relicense the host, copy image to guest, create guest UCS, install and set boot location to new volume , reboot
- D. Relicense the host. Failover all guest's active traffic-groups to the other host, copy image to gest, create guest UCS install and set boot location to new volume, reboot
Answer: C
Explanation:
Switch guest, reactive, license first and then upgrade.
NEW QUESTION # 85
set payload {CACHE :: payload}
}
Which two profiles should be used on the virtual server? (Choose two.)
- A. http compression
- B. stream
- C. http-transparent
- D. webacceleration
- E. http
Answer: D,E
NEW QUESTION # 86
AN LIM Specialist must upgrade the VCMP Guest active/standby LTM pair from version 11.3 to 11.5.3 on two VCMP Hosts.
where should the LTM Specialist import the latest 11.5.3 ISO images?
- A. to the VCMP Guest instances
- B. to both VCMP Hosts
- C. to the secondary vCMP Host and the standby Guest instance
- D. to the primary VCMP Host and the active Guest instance
Answer: A
NEW QUESTION # 87
An LTM Specialist to configure a backend server to be disabled it takes longer than 30 seconds to respond to a request.
Which values should the LTM Specialist enter for interval and timeout?
- A. Interval 30, timeout 30
- B. Interval 10, timeout 31
- C. Interval 10, timeout 30
- D. Interval 30, timeout 91
The official recommendation is that timeout 3 times the interval value +1.
Answer: B
NEW QUESTION # 88
Refer to the exhibit
Given the bigip conf extract shown where the servers only talk http on port 80, which node will receive the next user request?
- A. 72.10.1.1
- B. 10.1.1.2 0
- C. 10.1.1.1
- D. 10.1.1.3
Answer: D
NEW QUESTION # 89
A new DNS virtual server has been configured. Testing reveals that DNS server has failed to accept DNS over TCP. The configuration of the virtual server is as follows:
Which action should be taken to correct this issue?
- A. create a new virtual server with the service port of 53 and the protocol set to TC
- B. add a TCP prone to the existing virtual server.
- C. change the profile set on the virtual server To TCP/UDP
- D. change the profile set on the virtual server to TCP
Answer: A
NEW QUESTION # 90
An application is being load balanced through the LTM device using the configuration displayed below.
The network has been re-engineered to NAT all client connection. As a result, all client connections are hitting the same pool member.
Which changes should the LTM Specialist make in order to restore load balancing functionality wile maintaining session persistence?
- A. Change the virtual server type to Standard, add an http profile, and change the persistence profile to Destination Address
- B. Leave the virtual server type set Performance (Layer 4) and change the persistence type to hash
- C. Change the virtual server to Standard add an http profile, and change the persistence profile to Cookie persistence
- D. Change the virtual serer type to Forwarding (Layer 4) and leave the persistence type to hash source Address
Answer: C
NEW QUESTION # 91
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.
When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.
When the 200 status code is received, the pool member should receive No new connections.
Which configuration change should be made to meet these requirements?
- A. set the Send String to GET Arian and the Receive Disable String to 200 and Receive String to 201.
- B. set the Send String to GET Arian and the Receive String to 200 and Receive Disable String to 201.
- C. set the Send String to Get /status html and the Receive Disable String to 200 and Receive String to 201.
- D. set the Send String to GET/ status html and the Receive String to 200 and Receive Disable String to 201.
Answer: C
NEW QUESTION # 92
An LTM Specialist needs to terminate client SSL traffic and based on the cookie presented by client.
Which set of profiles should the LTM Specialist use?
- A. HTTPS, Client SSL, Cookie Persistence Profile
- B. HTTPS, Server SSL, SSL Cookie Profile
- C. HTTP, Server SSL, SSL Cookie Profile
- D. HTTP, Client SSL, Cookie Persistence Profile,
Answer: D
NEW QUESTION # 93
An LTM Specialist needs to create a virtual server to pass TCP traffic to three pool members.
Which two virtual server types should be used to meet the requirements? (Choose two)
- A. Forwarding (IP)
- B. Standard
- C. Performance (Layer A)
- D. Forwarding (Layer 2)
- E. Stateless
Answer: B,C
NEW QUESTION # 94
An LTM Specialist upgrades the switching infrastructure and the backend servers on the LAN segments.
The LTM Specialist notices a 20% memory usage increase on the BIG-IP device while handling the same number of concurrent connections.
A comparison of statistics pre-upgrade and post-upgrade shows a significant reduction on the following:
-RTT between the BIG-IP device and the backend servers
-Packet drops in the switch
Time to First Byte (TTFB)
The LTM Specialist is concerned with the scalability of the number of concurrent connections with the new memory usage.
Which setting should be changed to reduce the memory usage on the BIG-IP device?
- A. Reduce the idle of the client-side TCP profile
Explanation
After adjusting the architecture, the network quality becomes better. With the connection unchanged the memory usage increase by 20%. It means that the sending speed of the server is higher than the receiving speed of the client. F5 caches more content on the memory and causes the memory usage to.... - B. Reduce the proxy buffer high setting on the server-side TCP profile
- C. Increase the proxy buffer high setting on the server-side TCP profile
- D. Increase the receive window of the client-side TCP profile
Answer: B
NEW QUESTION # 95
......
New 301a Dumps - Real F5 Exam Questions: https://www.premiumvcedump.com/F5/valid-301a-premium-vce-exam-dumps.html
301a Dumps Prepare Your Exam With 150 Questions: https://drive.google.com/open?id=11BvnGawhMIEQGhs3ip4ij1WjYSTQlqyW