[Nov-2021] Latest Oracle 1z0-1075-20 exam dumps and online Test Engine
Oracle 1z0-1075-20: Selling Manufacturing Cloud Products and Solutions
NEW QUESTION 39
You are monitoring the production status on your shop floor. The production operator informs you that a particular resource that was not functioning for the past week is now back in operation.
Which option shows the steps to quickly release the work orders affected by this operation, which were put on hold using the mobile application?
- A. Select the infotile On Hold> Select a work order you want to release> Swipe left on the work order name> Tap or click the Release action, and click OK
- B. Select the infertile Dispatch List> Select a work order operation you want to release> Swipe left on the work order name> Tap or click the Release action, and click OK
- C. Select the infotile Unreleased> Select a work order you want to release>Swipe left on the work order name> Tap or click the Release action, and click OK
- D. Select the infotile On Hold> Select a work order you want to release> Select the work order operation on hold > Swipe left on the work order name> Tap or click the Release action, and click OK
Answer: B
NEW QUESTION 40
Your customer has the following business requirement. There are two work definitions created in the application. One Work Definition for Engine Finished Good and other Work Definition for Pallet Finished Good. The Engine Finished Good item should have Pallet Finished Goods as one of its component.
Identify the way to establish the relationship between Pallet and Engine Work Definitions.
- A. Create a Subinventory that could be the completion Subinventory for yielding the pallet and then the same Subinventory can serve as the supply Subinventory of the pallet in the Work Definition created for Engine.
- B. Assign a higher priority to the Work Definition created for Engine and a lower one for the Work Definition for Pallet.
- C. The Work Definition versions can be used to tie the Work Orders.
- D. The two Work Definitions can be tied through Project or Seiban numbers.
Answer: C
NEW QUESTION 41
The Manufacturing plant has two 8-hour shifts for the work center WC1: Day Shift and Night Shift. You associate four units each for resources R1, R2, R3, and R4 to the work center WC1. The customer wants to assign all units of resource R2 available for Day and Night Shift.
Identify the correct sequence of steps to achieve this requirement.
- A. Associate Resource R2 with Work Center WC1> Deselect the Available 24 Hours check box> Resource Availability region> Enter 2 in Day Shift Column> Enter 2 in Night Shift Column
- B. Associate Resource R2 with Work Center WC1> Select Available 24 Hours check box> Resource Availability region> Enter 4 in Day Shift Column> Enter 4 in Night Shift Column.
- C. Associate Resource R2 with Work Center WC1> Deselect the Available 24 Hours check box> Resource Availability region> Enter 4 in Day Shift Column> Enter 4 in Night Shift Column.
- D. Associate Resource R2 with Work Center WC1> Select the Available 24 Hours check box> Resource Availability region> Enter 2 in Day Shift Column > Enter 2 in Night Shift Column.
Answer: D
NEW QUESTION 42
While creating an item in Product Information Management (PIM), the following two item templates are selected in sequence and applied.
1. Template: Finished Goods (WIP = No, Customer Ordered = Yes)
2. Template: Sub-assembly (WIP = Yes, Customer Ordered = No)
Identify the Item Attribute values in the application.
- A. WIP = Yes, Customer Ordered = No
- B. WIP = Yes, Customer Ordered = Yes
- C. WIP = No, Customer Ordered = No
- D. WIP = No, Customer Ordered = Yes
Answer: D
NEW QUESTION 43
During a Manufacturing Cloud implementation, the Production Supervisor wants to close the work orders for last month and wants to make sure that the work orders include the correct cost.
Identify the approach to be taken by the Production Supervisor.
- A. The Production Supervisor needs to include all costs and variances in last month's work orders and close them; however, the work orders where updates are expected, should not be closed.
- B. Work order costs can be updated anytime regardless of the status of the work order.
- C. The Production Supervisor need not include cost variances while costing last month's work orders because those can be applied directly in subledger accounting.
- D. The Production Supervisor should make sure that all costs are included while closing last month's work orders; however, variances can be included after closing the work orders.
Answer: A
NEW QUESTION 44
You have been asked to set up cost estimates for 10 different purchased items. Which two steps could be used to accomplish this task?
- A. Call web service.
- B. Run the ESS process "Update Item Cost Estimate".
- C. Enter cost estimates directly into UI.
- D. Import spreadsheet.
- E. Use the Mass Edit functionality.
Answer: C,D
NEW QUESTION 45
A plant runs 24x7 daily using three continuous shifts of 8 hours each. One unit of an equipment resource R1 is assigned to each of the three shifts. On a specific work order, the resource R1 is required to work for 2 hours. The resource is set up with an efficiency of 50% and utilization of 100%. R1 is scheduled to start on the given work order at noon.
What time will R1 be scheduled to finish, assuming no calendar exceptions have been set?
- A. 12:30 PM
- B. 1:00 PM
- C. 8:00 PM
- D. 4:00 PM
- E. 2:00 PM
Answer: D
NEW QUESTION 46
A Production operator in your company is required to report production activities, such as completing or scrapping production units, by referencing a work definition without creating work orders.
Identify the manufacturing transaction that a production operator can perform for reporting such activities.
- A. Material Transactions
- B. Resource Transactions
- C. Operation Transactions
- D. Orderless Transactions
- E. Movement request
Answer: D
NEW QUESTION 47
An employee is responsible for dealing with different manufacturing practices and processes, machines, tools and equipment that turn raw material into a product.
Which seeded job role must this employee be provided with?
- A. Production Operator
- B. Production Supervisor
- C. Production Engineer
- D. Manufacturing Supervisor
- E. Manufacturing Engineer
Answer: E
NEW QUESTION 48
Identify three types of Item Quantities displayed in the Work Order History tab.
- A. Total Quantity
- B. Remaining Quantity
- C. Scrapped Quantity
- D. In Process Quantity
- E. Completed Quantity
Answer: B,C,E
NEW QUESTION 49
You want to use a predefined Standard Operation in a Work Definition, but you also want to change the usage of the Standard Operation resource. Identify the setup required.
- A. Select the Referenced check box while adding the standard operation to the work definition and change the usage manually.
- B. Use a Resource exception for the resource and alter its usage.
- C. Deselect the Referenced check box while adding the standard operation to the work definition and change the usage manually.
- D. Use the Transfer and Edit Standard Operation functionality to edit the resource usage.
Answer: A
NEW QUESTION 50
A Work Center created a month ago is no longer in use now. You want to remove the Work Center; however, the system is no allowing you to delete it.
Identify three reasons for this.
- A. There are resources associated with the Work Center.
- B. The work center is being referenced in the Work Area.
- C. The work center is being references in the work definition operation.
- D. The Work Center is being referenced in the Closed Work Order.
- E. The Work Center is being referenced in the Open Work Order.
Answer: A,B,E
NEW QUESTION 51
The Manufacturing Engineer, responsible for creating and maintaining the Work Definitions, has scheduled the Process Item Structure Changes to Work Definitions program. However, after the execution of the program the engineer did not receive a notification with the details of the Item Structure changes.
Which two reasons could cause this?
- A. The engineer does not have the Manage Work Definitions function privilege.
- B. The engineer does not have Data access to Items Attributes.
- C. The engineer does not have Data access to Items.
- D. The engineer does not have Data access to Item Structures.
- E. The engineer does not have Data access to Manufacturing plant in which the Item Structure change was performed.
Answer: A,E
NEW QUESTION 52
A Manufacturing Engineer in a plant is creating an alternative manufacturing process for an item using its existing Work Definitions. After copying from the existing Work Definition WD1 to the alternative Work Definition WD2, the engineer finds that the operation items were not copied in the alternative manufacturing process WD2.
Identify the reason.
- A. The Item and Structure Name were changed in the new Work Definition WD2 during creation.
- B. The Start Data was not populated in the new Work Definition WD2 during creation.
- C. The Production Priority was not populated in the new Work Definition WD2 during creation.
- D. The Item and Structure Name in the existing Work Definition WD1 were retained in the new Work Definition WD2 as well during creation.
Answer: B
NEW QUESTION 53
In a manufacturing cloud implementation, production operators want to perform work order updates using Dispatch List.
Identify two tasks that the Dispatch List allows the production users to perform.
- A. Report Cost Transactions
- B. Report Component Returns
- C. Report Resource Transactions
- D. Report Receipts
- E. Report Material Transactions by Quantity and Serial Number
Answer: C,E
NEW QUESTION 54
A manufacturing cloud user wants to print information available in the work order in PDF.
Identify the three reports that the user can print directly from the work order screen using the Print PDF action.
- A. Print Component List
- B. Bill of material
- C. Resource List
- D. Print Labels
- E. Work Order Traveler
Answer: A,D,E
NEW QUESTION 55
Your customer runs two daily shifts in her plant: Morning Shift and Evening Shift. A resource LATHE is assigned to the work center W1. There are five units of LATHE available, of which three units are available for the Morning Shift and the remaining units are available for the Evening Shits.
Which two actions must you perform to associate LATHE with W1?
- A. Do not select the Available 24 Hours check box and in the Resource Availability region, enter 60% against the resource LATHE in the Morning Shift column.
- B. Select the Available 24 Hours check box and in the Resource Availability region, enter 3 against the resource LATHE in the Morning Shift column.
- C. Do not select the Available 24 Hours check box and in the Resource Availability region, enter 40% against the resource LATHE in the Evening Shift column.
- D. Do not select the Available 24 Hours check box and in the Resource Availability region, enter 3 against the resource LATHE in the Morning Shift column.
- E. Select the Available 24 Hours check box and in the Resource Availability region, enter 2 against the resource LATHE in the Evening Shift column.
- F. Do not select the Available 24 Hours check box and in the Resource Availability region, enter 2 against the resource LATHE in the Evening Shift column.
Answer: A,B
NEW QUESTION 56
You are setting up Fusion Manufacturing to support Back-to-Back Fulfillment.
Identify an option that needs to be set for oracle Fusion Planning Central to plan back-to-back item components and resources.
- A. Select the Used in Planning check box in the item definition.
- B. Select the Used in Planning check box in the Work Definition Names.
- C. Select the Used in Planning check box in the Work Structure.
- D. Select the Used in Planning check box in the new Work Definition.
Answer: B
NEW QUESTION 57
......
New 2021 1z0-1075-20 Test Tutorial (Updated 65 Questions): https://www.premiumvcedump.com/Oracle/valid-1z0-1075-20-premium-vce-exam-dumps.html