Get ready to pass the JN0-636 Exam right now using our JNCIP-SEC Exam Package
A fully updated 2023 JN0-636 Exam Dumps exam guide from training expert PremiumVCEDump
Juniper JN0-636 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 29
Exhibit
You are using traceoptions to verify NAT session information on your SRX Series device. Referring to the exhibit, which two statements are correct? (Choose two.)
- A. This is the first packet in the session.
- B. The SRX Series device is performing only source NAT on this session.
- C. The SRX Series device is performing both source and destination NAT on this session.
- D. This is the last packet in the session.
Answer: C,D
NEW QUESTION 30
Exhibit
Which two statements are correct about the output shown in the exhibit. (Choose two.)
- A. The packet is an SSH packet
- B. The packet matches a user-configured policy
- C. The source address is translated.
- D. The destination address is translated.
Answer: A,C
NEW QUESTION 31
You have designed the firewall filter shown in the exhibit to limit SSH control traffic to yours SRX Series device without affecting other traffic.
Which two statement are true in this scenario? (Choose two.)
- A. Applying the filter will not achieve the desired result.
- B. The filter should be applied as an output filter on the loopback interface.
- C. Applying the filter will achieve the desired result.
- D. The filter should be applied as an input filter on the loopback interface.
Answer: A,D
Explanation:
https://www.juniper.net/documentation//en_US/junos/topics/concept/firewall-filter-ex-series-evaluation-understanding.html
NEW QUESTION 32
Exhibit
You are using traceoptions to verify NAT session information on your SRX Series device. Referring to the exhibit, which two statements are correct? (Choose two.)
- A. This is the first packet in the session.
- B. The SRX Series device is performing only source NAT on this session.
- C. The SRX Series device is performing both source and destination NAT on this session.
- D. This is the last packet in the session.
Answer: C,D
NEW QUESTION 33
Your company wants to use the Juniper Seclntel feeds to block access to known command and control servers, but they do not want to use Security Director to manage the feeds.
Which two Juniper devices work in this situation? (Choose two)
- A. QFX Series devices
- B. EX Series devices
- C. SRX Series devices
- D. MX Series devices
Answer: A
NEW QUESTION 34
Exhibit
An administrator wants to configure an SRX Series device to log binary security events for tenant systems.
Referring to the exhibit, which statement would complete the configuration?
- A. Configure the tenant as TSYS1 for the pi security profile.
- B. Configure the tenant as master for the pi security profile.
- C. Configure the tenant as root for the pi security profile.
- D. Configure the tenant as local for the pi security profile
Answer: C
NEW QUESTION 35
SRX Series device enrollment with Policy Enforcer fails To debug further, the user issues the following commandshow configuration services security-intelligence url
https : //cloudfeeds . argon . juniperaecurity . net/api/manifeat. xml
and receives the following output:
What is the problem in this scenario?
- A. Junos Space does not have matching schema based on the
- B. The device is directly enrolled with Juniper ATP Cloud.
- C. The device is already enrolled with Policy Enforcer.
- D. The SRX Series device does not have a valid license.
Answer: D
NEW QUESTION 36
According to the log shown in the exhibit, you notice the IPsec session is not establishing.
What is the reason for this behavior?
- A. Mismatched preshared key
- B. Mismatched peer ID
- C. Incorrect peer address.
- D. Mismatched proxy ID
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/nce/topics/example/policy-based-vpn-using-j-series-srxseries-device-configuring.html
NEW QUESTION 37
You are asked to determine if the 203.0.113.5 IP address has been added to the third-party security feed, DS hield, from Juniper Seclnte1. You have an SRX Series device that is using Seclnte1 feeds from Juniper ATP Cloud Which command will return this information?
- A. show security dynamic-address category-name Infected-Hosts | match 203.0.113.5
- B. show security dynamic-address category-name IPFilter I match 203.0.113.5
- C. show Security dynamic-address category-name JWAS | match 203.0.113.5
- D. show security dynamic-address category-name CC | match 203.0.113.5
Answer: C
NEW QUESTION 38
Regarding IPsec CoS-based VPNs, what is the number of IPsec SAs associated with a peer based upon?
- A. The number of classifiers configured for the VPN.
- B. The number of traffic selectors configured for the VPN.
- C. The number of forwarding classes configured for the VPN.
- D. The number of CoS queues configured for the VPN.
Answer: B
NEW QUESTION 39
All interfaces involved in transparent mode are configured with which protocol family?
- A. bridge
- B. inet
- C. mpls
- D. ethernet - switching
Answer: C
NEW QUESTION 40
You are asked to configure a security policy on the SRX Series device. After committing the policy, you receive the "Policy is out of sync between RE and PFE <SPU-name(s)>." error.
Which command would be used to solve the problem?
- A. request security polices resync
- B. request service-deployment
- C. request security polices check
- D. restart security-intelligence
Answer: A
Explanation:
https://kb.juniper.net/InfoCenter/index?page=content&id=KB30443&cat=SRX_SERIES&actp=LIST
NEW QUESTION 41
Which method does an SRX Series device in transparent mode use to learn about unknown devices in a network?
- A. LLDP-MED
- B. RSTP
- C. packet flooding
- D. IGMP snooping
Answer: A
NEW QUESTION 42
Exhibit
Referring to the exhibit, which statement is true?
- A. This custom block list feed will be used after the Juniper Seclntel block list feed.
- B. This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.
- C. This custom block list feed will be used before the Juniper Seclntel
- D. This custom block list feed will be used instead of the Juniper Seclntel block list feed
Answer: A
NEW QUESTION 43
Which three type of peer devices are supported for Cos-Based IPsec VPN?
- A. cSRX
- B. High-end SRX Series device
- C. Branch-end SRX Series devics
- D. vSRX
Answer: B,C,D
NEW QUESTION 44
Exhibit
Referring to the exhibit, which three protocols will be allowed on the ge-0/0/5.0 interface? (Choose three.)
- A. IPsec
- B. DHCP
- C. IBGP
- D. NTP
- E. OSPF
Answer: A,D,E
NEW QUESTION 45
Exhibit
The exhibit shows a snippet of a security flow trace.
In this scenario, which two statements are correct? (Choose two.)
- A. Destination NAT occurs.
- B. The capture is a packet from the source address 172.20.101.10 destined to 10.0.1.129.
- C. An existing session is found in the table.
- D. This packet arrived on interface ge-0/0/4.0.
Answer: B,C
NEW QUESTION 46
You are connecting two remote sites to your corporate headquarters site; you must ensure that all traffic is secured and only uses a single Phase 2 SA for both sites.
In this scenario, which VPN should be used?
- A. An IPsec group VPN with the corporate firewall acting as the hub device.
- B. A hub-and-spoke IPsec VPN with the corporate firewall acting as the hub device.
- C. A full mesh Layer 3 VPN with the corporate firewall acting as the hub device.
- D. Full mesh IPsec VPNs with tunnels between all sites.
Answer: A
Explanation:
https://www.juniper.net/us/en/local/pdf/app-notes/3500202-en.pdf
NEW QUESTION 47
You are required to deploy a security policy on an SRX Series device that blocks all known Tor network IP addresses. Which two steps will fulfill this requirement? (Choose two.)
- A. Enable a third-party Tor feed.
- B. Enroll the devices with Juniper ATP Appliance.
- C. Create a custom feed containing all current known MAC addresses.
- D. Enroll the devices with Juniper ATP Cloud.
Answer: B,C
NEW QUESTION 48
Exhibit
Referring to the exhibit, which two statements are true about the CAK status for the CAK named "FFFP"? (Choose two.)
- A. CAK is not used for encryption and decryption of the MACsec session.
- B. CAK is used for encryption and decryption of the MACsec session.
- C. SAK is not generated using this key.
- D. SAK is successfully generated using this key.
Answer: B,C
NEW QUESTION 49
You are asked to provide single sign-on (SSO) to Juniper ATP Cloud. Which two steps accomplish this goal? (Choose two.)
- A. Configure Microsoft Azure as the service provider (SP).
- B. Configure Juniper ATP Cloud as the service provider (SP).
- C. Configure Microsoft Azure as the identity provider (IdP).
- D. Configure Juniper ATP Cloud as the identity provider (IdP).
Answer: A,C
NEW QUESTION 50
......
Master 2023 Latest The Questions JNCIP-SEC and Pass JN0-636 Real Exam!: https://www.premiumvcedump.com/Juniper/valid-JN0-636-premium-vce-exam-dumps.html
Practice To JN0-636 - PremiumVCEDump Remarkable Practice On your Security, Professional (JNCIP-SEC) Exam: https://drive.google.com/open?id=1xGKVIua_RlRWwcf-bm6UsS5TzUz4Yid-