2024 Easy Success Network Appliance NS0-162 Exam in First Try
Best NS0-162 Exam Dumps for the Preparation of Latest Exam Questions
The NS0-162 exam tests the candidate's ability to administer and manage NetApp ONTAP data storage solutions. NS0-162 exam covers various topics related to the administration of NetApp data storage systems, including storage management, data protection, data security, and performance optimization. NS0-162 exam is designed to test the candidate's ability to configure, manage, troubleshoot, and optimize NetApp storage solutions.
NEW QUESTION # 16
After deploying an AFF A400, you want to deploy a storage virtual machine (SVM) to serve SMB data.
Which three conditions must exist in this scenario? (Choose three.)
- A. You must have sufficient space for the root volume.
- B. You must have a non-root aggregate in the online state.
- C. You must have configured the export policies.
- D. You must synchronize the cluster time.
- E. You must have encryption enabled on the root volume.
Answer: A,B,D
Explanation:
Explanation
To deploy an SVM to serve SMB data, you must have sufficient space for the root volume, a non-root aggregate in the online state, and synchronize the cluster time. The root volume is the volume that contains the SVM configuration and metadata, and it must have enough space to accommodate the SVM growth1. The non-root aggregate is the aggregate that contains the data volumes that you will create and share using SMB2. The cluster time is the time that is synchronized across all nodes in the cluster, and it must be consistent with the Active Directory domain time to avoid authentication failures3. Encryption is not required on the root volume, asit does not store any user data. Export policies are not relevant for SMB access, as they are used to control NFS access4. References :- SVM root volume overview, Create a new SVM with a CIFS volume and share, Synchronize the cluster time, Export policy overview
NEW QUESTION # 17
Click the Exhibit button.
Referring to the exhibit, which volume has a snap reserve value set to zero (0)?
- A. netapp_esx
- B. netapp_esx_m1
- C. netapp_lnx_mi
- D. netapp_no1
Answer: C
NEW QUESTION # 18
You have a 50 TO FlexGroup volume that is serving NFSv3 on a FAS8300 HA pair that Is running ONTAP
9.8 software of files. A Linux du command runs for days to count files.
In this scenario, which native ONTAP feature will report real-time file counts?
- A. Quality of Service
- B. volume autosize
- C. File System Analytics
- D. Logical Space Reporting
Answer: C
Explanation:
Explanation
File System Analytics is a native ONTAP feature that collects and aggregates data in real time, providing detailed information concerning file and directory count, file-age histograms, capacity use, and other parameters1. You can use ONTAP System Manager to visualize the data using industry standard measures such as hot, warm, and cold2. File System Analytics is available on ONTAP 9.8 and later versions3. Quality of Service, Logical Space Reporting, and volume autosizeare not features that report real-time file counts, but rather features that manage performance, efficiency, and capacity of volumes45 . References :- TR-4867: Best Practice Guidelines for ONTAP FIle System Analytics, File System Analytics overview, File System Analytics feature availability, [Quality of Service overview], [Logical space reporting overview], [Volume autosize overview]
NEW QUESTION # 19
Click the Exhibit button.
You are unable to mount an NFS volume named vol1.
Referring to the exhibit, what Is the reason for the mount failure?
- A. The vol1 volume did not have an export policy rule.
- B. The svm_root volume did not have an export policy rule.
- C. The 0.0.0.0/0 client match did not match the subnet of the NFS client.
- D. The vol1 volume is not mounted to the namespace.
Answer: A
NEW QUESTION # 20
Exhibit.
You are adding a NetApp AFF A400 system to an existing 4-node cluster and want to know which ports you would use to expand your cluster.
Referring to the exhibit, which tool would you use to accomplish this task?
- A. Active 1Q Unified Manager
- B. NetApp Interoperability Matrix (IMT)
- C. Active IQ Conflg Advisor
- D. NetApp Hardware Universe (HWU)
Answer: D
NEW QUESTION # 21
Your company requests that the monthly performance data of your ONTAP 9.8 cluster be exported to a CSV file for further processing. In this scenario, which three NetApp products satisfy this requirement? (Choose three.)
- A. Cloud Insights
- B. Active IQ Config Advisor
- C. Active IQ OneCollect
- D. Active IQ Unified Manager
- E. ONTAP System Manager
Answer: B,D,E
NEW QUESTION # 22
You want to scale out storage performance for read-Intensive data across multiple locations. In this scenario, which NetApp feature accomplishes this task?
- A. FlexVol
- B. FlexCache
- C. FlexClone
- D. Flash Pool
Answer: C
NEW QUESTION # 23
Exhibit.
You recently added a new ESXi host to your VMware vSphere cluster. However, you cannot mount any of the existing NFS datastores to the host. Referring to the exhibit, which action solves the problem?
- A. Add SMB/CIFS to the access protocols.
- B. Add HOST 3's IP address to the NFS export policy.
- C. Enable Kerberos in the export policy.
- D. Add NFSv4 to the access protocols.
Answer: B
NEW QUESTION # 24
What are the two capabilities of an SVM administrator? (Choose two.)
- A. to create new users
- B. to create LUNs
- C. to delete snapshot copies
- D. to delegate an aggregate to the SVM
Answer: B,C
NEW QUESTION # 25
A customer has a 2-node AFF A220 cluster and needs to enable the FC protocol. The onboard UTA2 ports are configured for 10Gbps Ethernet. In this scenario, what are two different methods to use FCP over the UTA2 ports? (Choose two.)
- A. Swap the Ethernet transceivers in the UTA2 ports for 1Gbps transceivers, and configure the ports as target ports.
- B. Swap the Ethernet transceivers in the UTA2 ports for FC transceivers, and configure the ports as target ports.
- C. Connect onboard UTA2 ports to a Nexus switch and enable FCP.
- D. Change the existing UTA2 ports from 10 Gbps speed to 8 Gb speed.
Answer: B,C
Explanation:
Explanation
The UTA2 ports are converged network adapters that can support either 10Gb Ethernet and FCoE or Fibre Channel modes. To use FCP over the UTA2 ports, there are two possible methods:
Connect onboard UTA2 ports to a Nexus switch and enable FCP: This method allows the UTA2 ports to remain in the 10Gb Ethernet mode, but use the FCoE protocol to transport FC frames over the Ethernet network. The Nexus switch acts as a FCoE forwarder that bridges the FCoE traffic from the UTA2 ports to the FC fabric. This method requires the Nexus switch to support FCoE and the UTA2 ports to have the correct SFP+ transceivers for 10Gb Ethernet.
Swap the Ethernet transceivers in the UTA2 ports for FC transceivers, and configure the ports as target ports: This method changes the UTA2 ports from the 10Gb Ethernet mode to the FC mode, which allows the UTA2 ports to directly connect to the FC fabric. This method requires the UTA2 ports to have the correct SFP+ transceivers for FC and the ports to be configured as target ports using the ucadmin command.
The other two options are not valid methods to use FCP over the UTA2 ports:
Swap the Ethernet transceivers in the UTA2 ports for 1Gbps transceivers, and configure the ports as target ports: This method is not possible because the UTA2 ports do not support 1Gbps Ethernet mode.
The UTA2 ports can only operate in 10Gb Ethernet or FC modes.
Change the existing UTA2 ports from 10 Gbps speed to 8 Gb speed: This method is not possible because the UTA2 ports do not support changing the speed without changing the mode. The UTA2 ports can only operate in 10Gb Ethernet or FC modes, and the speed is determined by the mode and the transceiver type.
References :- What are Unified Target Adapter (UTA2)/CNA Ports and how to configure them?, Change the UTA2 port from CNA mode to FC mode, Netapp Exam NS0-162 Questions and Answers - Update Dec 2023 - DumpsMate
NEW QUESTION # 26
You have an ESXI cluster with VMware VMFS LUNs on an AFF A400 system. After troubleshooting performance Issues, you determine that timeout best practices are not set on the hosts.
In this scenario, which NetApp tool would apply the best practice settings?
- A. Virtual Storage Console (VSC)
- B. SnapCenter Plug-in for VMware vSphere
- C. SnapManager
- D. SAN Host Utilities
Answer: A
Explanation:
Explanation
Virtual Storage Console (VSC) is a vCenter plug-in that provides end-to-end storage management for VMware environments that run on NetApp storage systems. VSC enables you to configure the ESXi host multipathing and HBA timeout settings according to the NetApp best practices. You can use the Set Recommended Values option in the ONTAP tools menu to apply the recommended settings for your system.
VSC also provides other features such as provisioning, backup and restore, monitoring, and optimization of NetApp storage forVMware. References :- Virtual Storage Console for VMware vSphere, Configure ESXi server multipathing and timeout settings
NEW QUESTION # 27
You have created a new FlexCache cache volume and want to warm the cache before clients access the cache volume for the first time. In this scenario, how would you accomplish this task?
- A. Copy the data from the origin volume to the cache volume with the NetApp XCP Migration Tool.
- B. Prepopulate the cache volume with data from the origin volume using the flexcache prepopulate start command.
- C. Synchronize the origin and cache first with the volume flexcache sync-properties command.
- D. Enable block-level Invalidation using the volume flexcache origin config modify command.
Answer: B
Explanation:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-fc-mgmt%2FGUID-E878AB6F-2A64-4E66-B865-6C11A0962AA9.html
NEW QUESTION # 28
After creating an SVM In an ONTAP cluster, you are asked to delegate administration of the newly created SVM to an SVM administrator. In this scenario, which two tasks must you complete? (Choose two.)
- A. Create the vsadmin user account in the new SVM.
- B. Set a password for (the vsadmin user account.
- C. Create a LIF for SVM management.
- D. Configure role-based access control (RBAC) for the vsadmin user account.
Answer: A,B
NEW QUESTION # 29
Click the Exhibit button.
You have a mission-critical SQL application that uses a single SMB 3.1.1 share to host its database.
The storage node that is hosting the SMB share sql01_ ca for the SQL database experiences a hardware failure and fails over to the surviving node.
Referring to the exhibit, what is the state of the SMB share for the SQL database during the failover?
- A. The SMB share will be available, and all data is accessible.
- B. The SMB share will be unavailable until node failback.
- C. The SMB share will be available, but all data is corrupted.
- D. The SMB share is unavailable due to its stateful nature.
Answer: A
NEW QUESTION # 30
Your company requires WORM archiving of data on their ONTAP cluster. The data must not be able to be deleted even by an administrator. Which ONTAP feature fulfills this requirement?
- A. SnapMlrror software
- B. SnapLock Compliance
- C. SnapVault software
- D. SnapLock Enterprise
Answer: B
Explanation:
Reference:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-arch-con%2FGUID-B0D72285-9301-4A20-B68A-8C64A317E995.html
NEW QUESTION # 31
You have deployed an ONTAP C190 cluster enabled with the iSCSI protocol. Your manager asks for available options to protect the data on your cluster using the native SnapMirror technology.
In this scenario, which two products would satisfy this request? (Choose two.)
- A. ONTAP Select
- B. Cloud Volumes ONTAP
- C. Azure NetApp Files
- D. Cloud Volumes Service for AWS
Answer: A,B
NEW QUESTION # 32
Auditing has been enabled and configured on your ONTAP storage system. You have also created audit policies to monitor files and folders. Auditing has been running for over six months. You want to ensure that there have been no improper file access attempts.
How would you accomplish this task?
- A. Import EVTX files Into Microsoft Event Viewer.
- B. Use the Active IQ Web site to read EVTX files.
- C. Use Microsoft System Center to read EVTX files.
- D. Import EVTX files into Microsoft SQL.
Answer: A
Explanation:
Explanation
ONTAP auditing generates binary log files that record the file and folder access events based on the audit policies. By default, ONTAP converts the binary log files to the EVTX file format, which is compatible with Microsoft Event Viewer. The EVTX files are stored in a location specified by the SVM administrator. To view the audit event logs, you can import the EVTX files into Microsoft Event Viewer and filter, sort, and analyze the events. You can also use other tools that support the EVTX file format, such as Microsoft Log Parser or third-party software12. The other options are not valid ways to accomplish this task. References :- View the audit event logs, How to access audit logs?
NEW QUESTION # 33
A customer wants to migrate a series of LUNs from a third-party array to a FAS. In this scenario, which two tools would the customer use? (Choose two.)
- A. NKS
- B. FLI
- C. XCP
- D. ADP
Answer: B,C
Explanation:
Migrate a series of LUNs from a third-party array to a FAS.
NEW QUESTION # 34
Exhibit
You have a 4-node cluster.
How many ISCSI LIFs will be created from the SVM setup wizard, as shown in the exhibit?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 35
You have a remote FlexCache storage device that is running on ONTAP Select 9.8 software. The cache origin volume Is on an FAS8700 that is running ONTAP 9.8 software. The WAN connection dropped, and the FlexCache volume is in disconnected mode.
In this scenario, which LIFs would you ping to troubleshoot the disconnect?
- A. management
- B. Intercluster
- C. cluster
- D. data
Answer: C
NEW QUESTION # 36
A volume Is set to use Adaptive QoS with the default policy.
In this scenario, which change would affect the QoS throughput ceiling?
- A. The volume Is resized.
- B. Disks are added to the volume's aggregate.
- C. More clients access the volume.
- D. Data is added to the volume.
Answer: A,D
Explanation:
Explanation
Adaptive QoS is a feature that automatically adjusts the QoS throughput ceiling or floor based on the volume size, either used or allocated. The QoS throughput ceiling is the maximum number of IOPS or MB/s that a volume can consume. Therefore, any change that affects the volume size, such as adding data to the volume or resizing the volume, would affect the QoS throughput ceiling. Adding disks to the volume's aggregate or having more clients access the volume would not affect the QoS throughput ceiling, as they do not change the volume size. References :- Use adaptive QoS policy groups, qos adaptive-policy-group create, Exam Name:
NetApp Certified Data Administrator, ONTAP DEMO
NEW QUESTION # 37
You are asked by your network engineering team to make sure that your NetApp cluster is configured to run LACP on Its network ports. Which network component satisfies this request?
- A. failover group
- B. broadcast domain
- C. VLAN
- D. Interface group
Answer: D
Explanation:
Explanation
LACP (Link Aggregation Control Protocol) is a protocol that enables the bundling of several physical ports into a single logical port to provide higher bandwidth, load balancing, and redundancy. An interface group is a network component that supports LACP on NetApp clusters. An interface group can combine two or more physical ports into a single logical port and can be configured with different policies, such as multimode, multimode_lacp, or singlemode. A VLAN (Virtual Local Area Network) is a logical segmentation of a network that allows devices to communicate as if they were on the same physical network, regardless of their physical location. A broadcast domain is a logical division of a network in which all nodes can reach each other by broadcasting. A failover group is a set of network ports that can take over the traffic of another port in case of a failure. References :- Combine physical ports to create interface groups, Configure LACP for optimal storage performance, What are the recommended settings for cluster network ports?, Port Troubleshooting Resolution Guide, Create Interface Group MODE LACP
NEW QUESTION # 38
......
NS0-162 Study Material, Preparation Guide and PDF Download: https://www.premiumvcedump.com/NetworkAppliance/valid-NS0-162-premium-vce-exam-dumps.html
NS0-162 Actual Questions 100% Same Braindumps with Actual Exam: https://drive.google.com/open?id=16dpnbjw9mLAXg-TUKygcp7vktgRRgtGS