2023 Correct Practice Tests of OmniStudio-Developer Dumps with Practice Exam
Certification Sample Questions of OmniStudio-Developer Dumps With 100% Exam Passing Guarantee
NEW QUESTION # 45
An OmniScript updates data from one Salesforce record, but when it completes, only some of the data is updated in Salesforce. A DataRaptor Load saves the dat
a. What error could cause this behavior?
Choose 2 answers
- A. In the DataRaptor Load, in the Preview tab, the Record is from the wrong record type.
- B. The input JSON paths In the DataRaptor Load do not match the JSON from the OmniScript.
- C. ContextId is misspelled in the merge code that passes the Recordld to the DataRaptor
- D. The fields that are not updated are read only in Salesforce.
Answer: B,D
NEW QUESTION # 46
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.
How can the developer configure the FlexCard to display the case records in this way?
- A. Select the Repeatable Mode property on the data table elements
- B. Enable the record Looping feature on the data table elements
- C. Enable the Repeat Records feature on the FlexCard Setup tab
- D. Disable the Repeat Record feature on the FlexCard setup tab
Answer: D
NEW QUESTION # 47
An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId. The integration Procedure data JSON contains the following nodes:
How should the Remote Action element be configured to pass the data correctly to the method?
- A. Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%
- B. Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:
- C. Check the Send Only Additional Input checkbox, and the following/ value pairs to Additional input:
- D. Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.
Answer: D
NEW QUESTION # 48
A developer needs to transform contact data into a JSON array.
Given the input JSON shown above, what are two ways a developer could configure a DATARaptor transform to achieve theexpected Output JSON? Choose 2 answers
- A. Set the Input JSON path as List(Contact) and the OutputJSON Path as Contact.
- B. Set the input JSON Path as Contact and the OutPut JSON Path as List (Contact)
- C. Use a formula LIST(Contact), and add the output of the formula as the input in the Transform tab.
- D. Set the Input JSON Path as Contact the out JSON Path as contact and output Data type as List.
Answer: A,D
NEW QUESTION # 49
You want a child FlexCard to use the parent's data source.
What do you need to do to make it work? Choose 2 answers
- A. You must select a data node in the Data Node field in the Properties panel on the parent FlexCard
- B. The same data source must be selected and configured in both parent and child FlexCards
- C. You must select a data node in the Data Node field in the Properties panel on the child FlexCard Pencil & Pape
- D. The same fields must be available in both parent and child FlexCards
Answer: A,C
NEW QUESTION # 50
On a FlexCard canvas, several fields display with Salesforce data, but one of the fields shows only the label. What could cause this?
- A. In the Setup Pabel, {recordId} is misspelled in the Data Source Input Map.
- B. In the FlexCard state, the Field type for the field does not match the type in the Salesforce record.
- C. The field name in the FlexCard state does not match the DataRaptor Extract's Output JSON Path name.
- D. There are No test Data test Parameters configured.
Answer: D
NEW QUESTION # 51
Which two of these options can retrieve data from a Salesforce object? Choose 2 answers
- A. An HTTP Action
- B. A DataRaptor Post Action
- C. A DataRaptor Extract Action
- D. A Lookup Action
- E. A DataRaptor Transform Action
- F. A DataRaptor Load Action
Answer: D,E
NEW QUESTION # 52
A)
B)
- A. Option A
- B. Option B
Answer: A
NEW QUESTION # 53
A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. Both parent and embedded OmniScripts have the same element name for the Set Values element.
- B. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
- C. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- D. The flag passData.JSON in the parent OmniScript in not configured correctly.
Answer: C
NEW QUESTION # 54
An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId. The integration Procedure data JSON contains the following nodes:
How should the Remote Action element be configured to pass the data correctly to the method?
- A. Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:
- B. Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%
- C. Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.
- D. Check the Send Only Additional Input checkbox, and the following/ value pairs to Additional input:
Answer: C
NEW QUESTION # 55
Why would you clone an Integration Procedure instead of versioning it?
- A. The new Integration Procedure will be used independently.
- B. The new Integration Procedure is replacing stub data.
- C. The new Integration Procedure uses a Cache Block.
- D. The new Integration Procedure is Chainable.
Answer: A
NEW QUESTION # 56
A developer needs to change some field labels on a FlexCard. The FlexCard is currently deployed to production. The developer that the best course of action is to version the FlexCard rather than cloning it.
Which factor would lead the developer to this decision?
- A. Another team member is developing new action, fields and styling for the current version of the FlexCard.
- B. The new and current versions will be displayed together on the same target.
- C. The new version of the FlexCard will be used in a new Console, and the current version of the FlexCard should remain unchanged.
- D. All instance of the FlexCard must be updated with the changes.
Answer: A
NEW QUESTION # 57
What is the reason for this? Refer to the exhibit below.
- A. Both parent and embedded OmniScripts have the same element name for the Set Values element.
- B. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- C. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
- D. The flag passData.JSON in the parent OmniScript in not configured correctly.
Answer: C
NEW QUESTION # 58
Refer to the exhibit below. What is the marge code needed for this integration procedure structure to pass a CaseNumber node from the DRReadCase DataRaptor Extract Action to the HTTP Action's HTTP URL?
- A. ((DRRCase, CaseNumber))
- B. MTTOPDetCaseDetail: CaseNumber%
- C. ((CaseNumber))
- D. %DRReadCase: CaseNumber%
Answer: D
NEW QUESTION # 59
A developer needs to build a DataRaptor Transform to send current weather to both an OmniScript Card Layout. Which of these samples would be valid for the Expected Output JSON?
A)
B)
C)
D)
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: C
NEW QUESTION # 60
A developer creates an OmniScript to update billing information. After analyzing the different types of customer interactions that occur at the company, the developer determines updating billing information should be included in the majority of customer interactions, which are represented by more than 20 different FlexCards.
What is the most efficient way for the developer to configure the action that invokes the OmniScript?
- A. As an OS Action
- B. As a Lightning Action
- C. As an OmniStudio Action
- D. As a Custom Action
Answer: A
NEW QUESTION # 61
What JSON from the DRGetAccountDetails action would display all six values correctly in the OmniScript structure shown? BikContacts is a Repeat Block.
- A. {"Contacts": [ {"ContactPhone": "(212) 169-1475", "ContactName": "Edward Stamos" }, {"ContactPhone": "(212) 189-8979", "ContactName": "Leanne Tomlin" } ], "AccountPhone: "2221546450", ""AccountName: "Acme" }
- B. {"BlkContacts": [ { "Phone": "(212) 169-1475", "Name": "Edward Stamos" }. { "Phone": "(212) 169-8979", "Name": "Leanne Tomlin" } J, "AccountPhone": "2221546450", "AccountName": "Acme" }
- C. {"ContactPhone": "(212) 169-1475", "ContactName". "Edward Stamos", "ContactPhone": "(212) 189-8979", "ContactName": "Leanne Tomlin", "AccountPhone": "2221546450", "AccountName": "Acme" }
- D. {"BlkContacts": [ { "ContactPhone": "(212) 169-1475", "ContactName: "Edward Stamos" }, { "ContactPhone": "(212) 189-6979". "ContactName": "Leanne Tomlin" } J, "AccountPhone "2221546450", "AccountName" "Acme" }
Answer: D
NEW QUESTION # 62
What parent JSON node name must be sent to a Calculation Procedure?
- A. Inputs
- B. input
- C. Input
- D. inputs
Answer: D
NEW QUESTION # 63
You have a FlexCard with five FlexCard states. Four of the states have a condition. Two of the states have true conditions.
Which state will be displayed?
- A. The state that has no condition
- B. The state that is closer to the top in the FlexCard canvas
- C. The state that is closer to the bottom in the FlexCard canvas
- D. The state that has the higher priority
Answer: B
NEW QUESTION # 64
A developer needs to build a multi-step intakeform. Each step must allow the user to cancel the intake at any time. The developer is using an LWC OmniScript to build the form.
How should the developer implement the cancel functionality for all steps using the LWC OmniScript Designer?
- A. Check the Enable Cancel checkbox in the Setup tab under Cancel Options.
- B. Add a navigation Action inside each step and set the Component name to ''Cancel'',
- C. Add a navigation Action outside each step and set the Element Name to ''Cancel'',
- D. Add a navigation Actioninside each step and set the Element Name to ''Cancel'',
Answer: A
NEW QUESTION # 65
......
OmniStudio-Developer Sample Practice Exam Questions 2023 Updated Verified: https://www.premiumvcedump.com/Salesforce/valid-OmniStudio-Developer-premium-vce-exam-dumps.html
Pass Key features of OmniStudio-Developer Course with Updated 88 Questions: https://drive.google.com/open?id=1UwGm4-1l5oMJlOkzTGA3E0eIi-ShkV7s