[2022] Valid NSE7_EFW-6.4 test answers & Fortinet NSE7_EFW-6.4 exam pdf
Verified NSE7_EFW-6.4 dumps Q&As - Pass Guarantee or Full Refund
Who should take the Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam
Anyone responsible for handling Enterprise Firewall 6.4 systems and FortiGate security details regularly, we recommend this course. For network and security professionals who need the expertise to centrally monitor, evaluate, and report on Fortinet security devices, we recommend this test. See the NSE7 EFW-6.4 dumps pdf to get a better idea of the exam contents to suit your interests.
For more info read reference:
Exam Blueprint Preparatory Course
NEW QUESTION 43
View the exhibit, which contains the output of a web diagnose command, and then answer the question below.
Which one of the following statements explains why the cache statistics are all zeros?
- A. There are no users making web requests.
- B. Theadministrator has reallocated the cache memory to a separate process.
- C. FortiGate is using a flow-based web filter and the cache applies only to proxy-based inspection.
- D. The FortiGuard web filter cache is disabled in the FortiGate's configuration.
Answer: D
NEW QUESTION 44
View the exhibit, which contains the output of a diagnose command, and then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. Servers with a negative TZ value are experiencing a service outage.
- B. Servers with the D flag are considered to be down.
- C. FortiGate will probe 121.111.236.179 every fifteen minutes for a response.
- D. FortiGate used 209.222.147.3 as the initial server to validate its contract.
Answer: C,D
Explanation:
Explanation
A - because flag is Failed so fortigate will check if server is available every 15 minD-state is I , contact to validate contract info
NEW QUESTION 45
View the exhibit, which contains the output of a diagnose command, and the answer the question below.
Which statements are true regarding the Weight value?
- A. Its value is incremented with each packet lost.
- B. Its initial value is statically set to 10.
- C. It determines which FortiGuard server is used for license validation.
- D. Its initial value is calculated based on the round trip delay (RTT).
Answer: A
NEW QUESTION 46
Refer to the exhibit, which contains the partial output of a diagnose command.
Based on the output, which two statements arecorrect? (Choose two.)
- A. Quick mode selectors are disabled.
- B. Anti-replay is enabled.
- C. Remote gateway IP is 10.200.4.1.
- D. DPD is disabled.
Answer: B,C
NEW QUESTION 47
Examine the output from the 'diagnose vpn tunnel list' command shown in the exhibit; then answer the question below.
Which command can beused to sniffer the ESP traffic for the VPN DialUP_0?
- A. diagnose sniffer packet any 'esp'
- B. diagnose sniffer packet any 'host 10.0.10.10'
- C. diagnose sniffer packet any 'port 4500'
- D. diagnose sniffer packet any 'port 500'
Answer: C
Explanation:
Explanation
NAT-Tis enabled. natt: mode=silentProtocol ESP is used. ESP is encapsulated in UDP port 4500 when NAT-T is enabled.
NEW QUESTION 48
Refer to exhibit, which contains the output of a BGP debug command.
Which statement explains why the state of the 10.200.3.1 peer is Connect?
- A. The local router has received the BGP prefixes from the remote peer.
- B. The local router is receiving BGP keepalives from theremote peer, but the local peer has not received the OpenConfirm yet.
- C. The local router is receiving the BGP keepalives from the peer, but it has not received a BGP prefix yet.
- D. The TCP session to 10.200.3.1 has not completed the 3-way handshake.
Answer: D
Explanation:
Explanation
BGP neighbor states and how they change:* Idle: Initial state* Connect: Waiting for a successful three-way TCP connection* Active: Unable to establish the TCP session* OpenSent: Waiting for an OPEN message from the peer* OpenConfirm: Waiting for the keepalive message from the peer* Established: Peers have successfully exchanged OPEN and keepalive messages
NEW QUESTION 49
An administrator is running the following sniffer in a FortiGate:
diagnose sniffer packet any "host 10.0.2.10" 2
What information isincluded in the output of the sniffer? (Choose two.)
- A. Ethernet headers.
- B. Port names.
- C. IP headers.
- D. IP payload.
Answer: C,D
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=11186
NEW QUESTION 50
Anadministrator has configured a dial-up IPsec VPN with one phase 2, extended authentication (XAuth) and IKE mode configuration. The administrator has also enabled the IKE real time debug:
diagnose debug application ike-1
diagnose debug enable
In which order is each step and phase displayed in the debug output each time a new dial-up user is connecting to the VPN?
- A. Phase1; IKE mode configuration; XAuth; phase 2.
- B. Phase1; XAuth; IKE mode configuration; phase2.
- C. Phase1; IKE mode configuration; phase 2; XAuth.
- D. Phase1; XAuth; phase 2; IKE mode configuration.
Answer: B
Explanation:
Explanation
https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-ipsecvpn-54/IPsec_VPN_Concepts/IKE_Packet_
NEW QUESTION 51
Examine the following routing table and BGP configuration; then answer the question below.
TheBGP connection is up, but the local peer is NOT advertising the prefix192.168.1.0/24. Which configuration change will make the local peer advertise this prefix?
- A. Enable the redistribution of static routers into BGP.
- B. Disable the settingnetwork-import-check.
- C. Enable the redistribution of connected routers into BGP.
- D. Enable the setting ebgp-multipath.
Answer: B
NEW QUESTION 52
View the exhibit, which contains the output of a debug command, and then answer the question below.
Which one of the following statements about this FortiGate is correct?
- A. It is currently in system conserve mode because of high CPU usage.
- B. It is currently in proxy conserve mode because of high memory usage.
- C. It is currently in memory conserve mode because of high memory usage.
- D. It is currently in extreme conserve mode because of high memory usage.
Answer: C
NEW QUESTION 53
Which two conditions must be met for a statistic route to be active in the routing table? (Choose two.)
- A. There is no other route, to the same destination, with a higherdistance.
- B. The outgoing interface is up.
- C. The next-hop IP address is up.
- D. The link health monitor (if configured) is up.
Answer: B,D
NEW QUESTION 54
View these partial outputs from two routing debug commands:
Which outbound interface will FortiGate use to route webtraffic from internal users to the Internet?
- A. Both port1 and port2
- B. port3
- C. port1
- D. port2
Answer: C
NEW QUESTION 55
Which two tasks are automated using the Install Wizard on FortiManager? (Choose two.)
- A. Import interface mappings from managed devices.
- B. Import policy packages from managed devices.
- C. Preview pending configuration changes for managed devices.
- D. Add devices to FortiManager.
- E. Install configuration changes to managed devices.
Answer: C,E
Explanation:
Explanation
https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device%20Manager/1200_ins There are 4 main wizards:Add Device: is used to add devices to central management and import their configurations.
Install: is used to install configuration changes from Device Manager or Policies & Objects to the managed devices. It allows you to preview the changes and, if the administrator doesn't agree with the changes, cancel and modify them.
Import policy: is used to import interface mapping, policy database, and objects associated with the managed devices into a policy package under the Policy & Object tab. It runs with the Add Device wizard by default and may be run at any time from the managed device list.
Re-install policy: is used to perform a quick install of the policy package. It doesn't give the ability to preview the changes that will be installed to the managed device.
NEW QUESTION 56
View the exhibit, which contains the partial output of an IKE real time debug, and then answerthe question below.
The administrator does not have access to the remote gateway. Based on the debug output, what configuration changes can the administrator make to the local gateway to resolve the phase 1 negotiation error?
- A. Change phase 1 encryption to 3DES and authentication to CBC.
- B. Change phase 1 encryption to 3DES and authentication to SHA256.
- C. Change phase 1encryption to AESCBC and authentication to SHA128.
- D. Change phase 1 encryption to AES128 and authentication to SHA512.
Answer: A
NEW QUESTION 57
View the exhibit, which contains a session entry, and then answer the question below.
Which statement is correct regarding this session?
- A. It is an ICMP session from 10.1.10.10 to 10.200.5.1.
- B. It is a TCP session in ESTABLISHED state from 10.1.10.10 to 10.200.5.1.
- C. It is a TCP session in CLOSE_WAIT state from 10.1.10.10 to 10.200.1.1.
- D. It is an ICMP session from 10.1.10.10 to 10.200.1.1.
Answer: A
NEW QUESTION 58
Examine the following partial output from two system debug commands; then answer the question below.
Which of the following statements are true regarding the above outputs? (Choose two.)
- A. Kernel indirectly accesses the low memory (LowTotal) through memorypaging
- B. The unit is running a 32-bit FortiOS
- C. The Cached value is always the Active value plus the Inactive value
- D. The unit is in kernel conserve mode
Answer: B,C
NEW QUESTION 59
View the exhibit, which contains a partial routing table, and then answer the question below.
Assuming all the appropriate firewall policies are configured, which of the following pings will FortiGate route?(Choose two.)
- A. Source IP address 10.1.0.24, Destination IP address 10.72.3.20.
- B. Source IP address 10.72.3.27, Destination IP address 10.1.0.52.
- C. Source IP address 10.72.3.52, Destination IP address 10.1.0.254.
- D. Source IP address10.73.9.10, Destination IP address 10.72.3.15.
Answer: B,C
NEW QUESTION 60
Whendoes a RADIUS server send an Access-Challenge packet?
- A. The user credentials are wrong.
- B. The server does not have the user credentials yet.
- C. The server requires more information from the user, such as the token code for two-factor authentication.
- D. The user account is not found in the server.
Answer: C
NEW QUESTION 61
Examine the output from the BGP real time debugshown in the exhibit, then the answer the question below:
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. BGP peers have successfully interchangedOpenandKeepalivemessages.
- B. The state of the remote BGP peer isOpenConfirm.
- C. Local BGP peer received a prefix fora default route.
- D. The state of the remote BGP peer will go toConnectafter it confirms the received prefixes.
Answer: A,C
NEW QUESTION 62
Examine thefollowing partial outputs from two routing debug commands; then answer the question below:
Why the default route using port2 is not displayed in the output of the second command?
- A. It has a higher distance than the default route using port1.
- B. It hasa higher priority than the default route using port1.
- C. It is disabled in the FortiGate configuration.
- D. It has a lower priority than the default route using port1.
Answer: A
Explanation:
Explanation
http://kb.fortinet.com/kb/viewContent.do?externalId=FD32103
NEW QUESTION 63
Examine the output from the 'diagnose debug authd fsso list' command; then answer the question below.
# diagnose debug authd fsso list-FSSO logons-IP: 192.168.3.1 User: STUDENT Groups: TRAINI NGAD/USERS Workstation: INTERNAL2. TRAINING. LAB The IP address 192.168.3.1 is NOT the one used by the workstation INTERNAL2. TRAINING. LAB.
What should the administrator check?
- A. The DNS name resolution for the workstation name INTERNAL2. TRAINING. LAB.
- B. The IP address recorded in the logon event for the user STUDENT.
- C. The reserve DNS lookup forthe IP address 192.168.3.1.
- D. The source IP address of the traffic arriving to the FortiGate from the workstation INTERNAL2.
TRAINING. LAB.
Answer: D
NEW QUESTION 64
......
Introduction to Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam
This exam is part of the preparation for the NSE 7 certification exam. The Fortinet Network Security Architect designation identifies your advanced skills in deploying, administering, and troubleshooting Fortinet security solutions. We recommend this certification for network and security professionals who are involved in the advanced administration and support of security infrastructures using Fortinet solutions. Visit the Fortinet NSE Certification Program page for information about certification requirements. You must pass a minimum of two Fortinet NSE 7 certification tests successfully:
- Fortinet NSE 7 - SD-WAN
- Fortinet NSE 7 - Advanced Analytics
- Fortinet NSE 7 - Cloud Security
- Fortinet NSE 7 - Secure Access
- Fortinet NSE 7 - Advanced Threat Protection
- Fortinet NSE 7 - Enterprise Firewall
- Fortinet NSE 7 - Enterprise Firewall 6.4 NSE7 EFW-6.4 exam test
The NSE 7 Network Security Architect designation recognizes your advanced skills and ability to deploy, administer, and troubleshoot Fortinet security solutions. To obtain certification, you must pass at least one Fortinet NSE 7 exam. NSE 7 certification is valid for two years from the date of completion. you will learn how FortiGate, FortiAP, FortiSwitch, and FortiAuthenticator enable secure connectivity over wired and wireless networks. You will also learn how to provision, administer, and monitor FortiAP and FortiSwitch devices using FortiManager. This course covers the deployment, integration, and troubleshooting of advanced authentication scenarios, as well as best practices for securely connecting wireless and wired users. You will learn how to keep the network secure by leveraging Fortinet Security Fabric integration between FortiGate, FortiSwitch, FortiAP, and FortiAnalyzer to automatically quarantine risky and compromised devices using IOC triggers.
NSE7_EFW-6.4 Exam Questions – Valid NSE7_EFW-6.4 Dumps Pdf: https://www.premiumvcedump.com/Fortinet/valid-NSE7_EFW-6.4-premium-vce-exam-dumps.html
NSE7_EFW-6.4 PDF Dumps Recently Updated Questions: https://drive.google.com/open?id=1ZJ11AKXL46kEJhznOcpZ_a3G7RUflulW